Radial Bubble Distribution in a Fluidized Bed with Vertical Tubes

被引:24
|
作者
Ruedisueli, Martin [1 ]
Schildhauer, Tilman J. [1 ]
Biollaz, Serge M. A. [1 ]
van Ommen, J. Ruud [2 ]
机构
[1] Paul Scherrer Inst, Gen Energy Res Dept, CH-5232 Villigen, Switzerland
[2] Delft Univ Technol, NL-2628 BL Delft, Netherlands
关键词
PROBES;
D O I
10.1021/ie3004418
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The radial distribution of bubble characteristics such as the bubble frequency, the bubble size, and the bubble rise velocity, is a key to better understanding the flow patterns of gas (and solids) in bubbling fluidized beds. Therefore, the radial distribution of bubble characteristics is investigated in a fluidized bed with vertical tubes by means of optical probes. Measurements are taken for Geldart B particles at two bed heights, three gas velocities, and three vertical tube bank configurations. While the bubble frequency shows a strong dependence on the radial position in the bed and the orientation of the vertical tubes, the bubble size and the bubble rise velocity, in particular in the lower portions of the bed, are more constant. Typical bubble pathways are shown to move from the column wall to the center axis of the bed with increased bed height. Therefore, in order to have a representative mean bubble size and mean bubble rise velocity, which accounts for the whole cross-section of the bed, an area-number weighted mean is introduced.
引用
下载
收藏
页码:13815 / 13824
页数:10
相关论文
共 50 条
  • [21] Numerical simulation of particle behavior in fluidized bed equipped with immersed vertical tubes
    Kobayashi, N
    Yamazaki, R
    Mori, S
    KAGAKU KOGAKU RONBUNSHU, 1999, 25 (05) : 815 - 819
  • [22] A system for measuring bubble voidage and frequency around tubes immersed in a fluidized bed of particles
    Whitty, Kevin J.
    Siddoway, Michael
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2010, 81 (07):
  • [23] A system for measuring bubble voidage and frequency around tubes immersed in a fluidized bed of particles
    Department of Chemical Engineering, University of Utah, Salt Lake City, UT 84112, United States
    Rev. Sci. Instrum., 7
  • [24] Particle normal stress distribution around a rising bubble in a fluidized bed
    Horio, M
    Iwadate, Y
    Sugaya, T
    POWDER TECHNOLOGY, 1998, 96 (02) : 148 - 157
  • [25] Effect of Bubble Injection Pattern on the Bubble Size Distribution in a Gas-Solid Fluidized Bed
    Tavassoli-Rizi, Mohammad H.
    Movahedirad, Salman
    Ghaemi, Ahad
    FLOW TURBULENCE AND COMBUSTION, 2017, 98 (04) : 1133 - 1151
  • [26] Effect of Bubble Injection Pattern on the Bubble Size Distribution in a Gas-Solid Fluidized Bed
    Mohammad H. Tavassoli-Rizi
    Salman Movahedirad
    Ahad Ghaemi
    Flow, Turbulence and Combustion, 2017, 98 : 1133 - 1151
  • [27] Combustion of an ammonia bubble with an oxygen bubble in a fluidized bed
    Pan, Suyang
    Ma, Jiliang
    Chen, Xiaoping
    Liang, Cai
    APPLIED THERMAL ENGINEERING, 2024, 244
  • [28] Analysis of Bubble Flow in a Fluidized Bed
    Wang Li\ Ni Xuezi$$$$ (Beijing Univ. of Science & Techn.)
    太原理工大学学报, 1997, (01) : 96 - 99
  • [29] INITIAL MOTION OF A BUBBLE IN A FLUIDIZED BED
    SANDFORD, IC
    LEUNG, LS
    BRITISH CHEMICAL ENGINEERING, 1971, 16 (2-3): : 229 - &
  • [30] BUBBLE FORMATION AT AN ORIFICE IN A FLUIDIZED BED
    HARRISON, D
    LEUNG, LS
    NATURE, 1961, 190 (477) : 433 - &