The effect of rotor blade shape on the performance of the wells turbine

被引：0
|
作者：
Webster, M [1 ]
Gato, LMC [1 ]
机构：
[1] Coventry Univ, Sch Engn, Coventry CV1 5FB, W Midlands, England
来源：
PROCEEDINGS OF THE NINTH (1999) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 1, 1999 | 1999年
关键词：
Wells turbine; wave energy; turbomachinery; blade section;
D O I：
暂无
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
The paper presents an experimental investigation into the effect of blade section on the performance of the Wells turbine. The blades tested Included one set of eight symmetrical constant chord NACA 0015 blades, one set of eight symmetrical optimised blades and two rotor solidities. The aim of the experiments was to validate predictive work which indicated that optimisation of the blade profiles could significantly delay the onset of separation.
引用
收藏
页码：169 / 173
页数：5
相关论文
共 50 条
  • [31] Effects of blade geometry on performance of wells turbine for wave power conversion
    Kim T.
    Setoguchi T.
    Kinoue Y.
    Kaneko K.
    [J]. Journal of Thermal Science, 2001, 10 (4) : 293 - 300
  • [32] Introducing Gurney flap to Wells turbine blade and performance analysis with OpenFOAM
    Kumar, P. Madhan
    Samad, Abdus
    [J]. OCEAN ENGINEERING, 2019, 187
  • [33] MEASUREMENT OF TURBINE ROTOR BLADE FLOWS
    DRING, RP
    JOSLYN, HD
    [J]. JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1981, 103 (02): : 400 - 405
  • [34] The Fracture Analysis of Turbine Rotor Blade
    Chen, Zhong-jun
    Chen, Jing
    [J]. 2ND INTERNATIONAL CONFERENCE ON ENERGY AND POWER ENGINEERING (EPE 2018), 2018, : 238 - 241
  • [35] Effects of Blade Geometry on Performance of Wells Turbine for Wave Power Conversion
    Taeho Kim Toshiaki Setoguchi Yoichi Kinoue Kenji Kaneko Department of Mechanical Engineering
    [J]. Journal of Thermal Science, 2001, (04) : 293 - 300
  • [36] Optimization of blade profiles for the Wells turbine
    Gratton, Tim
    Ghisu, Tiziano
    Parks, Geoff
    Cambuli, Francesco
    Puddu, Pierpaolo
    [J]. OCEAN ENGINEERING, 2018, 169 : 202 - 214
  • [37] The influence of the middle bending shape of the blade on the performance of a pump as turbine
    Wang, Tao
    Liu, Yunqi
    Dong, Yuancheng
    Xiang, Ru
    Bai, Yuxing
    [J]. ENERGY, 2024, 295
  • [38] Shape design and performance test for small wind turbine blade
    Wang X.
    Xia H.
    Li P.
    [J]. High Technology Letters, 2019, 25 (02) : 182 - 188
  • [39] Blade Tip Shape Optimization for Enhanced Turbine Aerothermal Performance
    De Maesschalck, C.
    Lavagnoli, S.
    Paniagua, G.
    [J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2014, 136 (04):
  • [40] Performance Improvement in Savonius Wind Turbine by Modification of Blade Shape
    Ramarajan, J.
    Jayavel, S.
    [J]. JOURNAL OF APPLIED FLUID MECHANICS, 2022, 15 (01) : 99 - 107
12345