Coarsening Kinetics of Semi-solid A356-5wt%TiB2 in situ Composite

被引:5
|
作者
Kumar, S. Deepak [1 ]
Acharya, Mihira [2 ]
Mandal, A. [2 ]
Chakraborty, M. [3 ]
机构
[1] Indian Inst Technol Bhubaneswar, Sch Mech Sci, Bhubaneswar 751007, Odisha, India
[2] Indian Inst Technol Bhubaneswar, Sch Minerals Met & Mat Engn, Bhubaneswar 751007, Odisha, India
[3] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
关键词
Cooling slope casting; Coarsening; A356; alloy; TiB2; Ostwald ripening; MICROSTRUCTURAL EVOLUTION; A356; ALLOY; BEHAVIOR;
D O I
10.1007/s12666-015-0648-z
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
An attempt has been made to investigate the coarsening behaviour of semisolid A356-5wt%TiB2 in situ composite produced by Cooling slope casting. It was found that the average grain size of alpha-Al in the gravity-cast alloy got reduced from 98 to 48 A mu m in the semi-solid A356-5TiB(2) composite. The primary alpha-Al in the composite were found to undergo substantial spheroidisation after 5 min at a reheating temperature of 585 A degrees C (f (s) = 0.5). Further, increase in holding time from 5 to 15 min resulted in grain growth of alpha-Al in both the alloy and the composites. The coarsening rate constant, K, for A356-5wt%TiB2 composite was found to be 339.73 mu m(3)/s which is 32 % lower than that of semi-solid A356 alloy, thus proving the effectiveness of TiB2 particles towards grain coarsening.
引用
收藏
页码:1075 / 1080
页数:6
相关论文
共 50 条
  • [21] Effect of TiB2 on Microstructure of 7075 Al Alloy Semi-Solid Slurry at Different Solid Fraction
    Gan, Guisheng
    Zhang, Chunhong
    Yang, Donghua
    Yang, Mingbo
    Jiang, Xin
    Shi, Yun-long
    MATERIALS TRANSACTIONS, 2017, 58 (05) : 734 - 738
  • [22] In Situ Synthesis of TiB2/NiAl Composite
    Zhang, Heng
    Zhu, He-Guo
    PROCEEDINGS OF THE 2ND ANNUAL INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL ENGINEERING (AME 2016), 2016, 85 : 131 - 135
  • [23] Microstructure and mechanical properties of in situ A356/TiB2 composites
    Le Yongkang
    Zhang Yijie
    Chen Dong
    Ma Naiheng
    Wang Haowei
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (10) : 1635 - 1638
  • [24] Microstructure and mechanical properties of in situ A356/TiB2 composites
    Le, Yongkang
    Zhang, Yijie
    Chen, Dong
    Ma, Naiheng
    Wang, Haowei
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2006, 35 (10): : 1635 - 1638
  • [25] Al-4 wt% Cu composite reinforced with in-situ TiB2 particles
    Lu, L
    Lai, MO
    Chen, FL
    ACTA MATERIALIA, 1997, 45 (10) : 4297 - 4309
  • [26] Mechanical properties of in-situ TiB2/A356 composites
    Wang, Mingliang
    Chen, Dong
    Chen, Zhe
    Wu, Yi
    Wang, Feifei
    Ma, Naiheng
    Wang, Haowei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 : 246 - 254
  • [27] Effect of In-Situ TiB2 Particles on the Creep Properties of 3 Wt.% TiB2/Al-Cu-Mg-Ag Composite
    Hengwen Xia
    Mengjia Li
    Guopeng Zhang
    Hai Huang
    Yunjia Shi
    Bin Cai
    Zhongxia Liu
    Jiefang Wang
    JOM, 2022, 74 : 4121 - 4128
  • [28] Effect of In-Situ TiB2 Particles on the Creep Properties of 3 Wt.% TiB2/Al-Cu-Mg-Ag Composite
    Xia, Hengwen
    Li, Mengjia
    Zhang, Guopeng
    Huang, Hai
    Shi, Yunjia
    Cai, Bin
    Liu, Zhongxia
    Wang, Jiefang
    JOM, 2022, 74 (11) : 4121 - 4128
  • [29] Effect of TiB2 Particle Size on Erosion Behavior of Ag-4wt% TiB2 Composite
    Wang Xianhui
    Yang Hao
    Liang Shuhua
    Liu Mabao
    Liu Qida
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (11) : 2612 - 2617
  • [30] Effect of TiB2 Particles on Microstructure of 7075 Al Alloy in Semi-Solid State Near Liquidus
    Gan, Gui-sheng
    Wang, Huai-shan
    Meng, Guo-qi
    Yang, Bin
    MATERIALS TRANSACTIONS, 2015, 56 (11) : 1787 - 1792