Coarsening Kinetics of Semi-solid A356-5wt%TiB2 in situ Composite

被引：5

作者：

Kumar, S. Deepak ^{[1
]}

Acharya, Mihira ^{[2
]}

Mandal, A. ^{[2
]}

Chakraborty, M. ^{[3
]}

机构：

[1] Indian Inst Technol Bhubaneswar, Sch Mech Sci, Bhubaneswar 751007, Odisha, India

[2] Indian Inst Technol Bhubaneswar, Sch Minerals Met & Mat Engn, Bhubaneswar 751007, Odisha, India

[3] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2015年 / 68卷 / 06期

关键词：

Cooling slope casting; Coarsening; A356; alloy; TiB2; Ostwald ripening; MICROSTRUCTURAL EVOLUTION; A356; ALLOY; BEHAVIOR;

D O I：

10.1007/s12666-015-0648-z

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

An attempt has been made to investigate the coarsening behaviour of semisolid A356-5wt%TiB2 in situ composite produced by Cooling slope casting. It was found that the average grain size of alpha-Al in the gravity-cast alloy got reduced from 98 to 48 A mu m in the semi-solid A356-5TiB(2) composite. The primary alpha-Al in the composite were found to undergo substantial spheroidisation after 5 min at a reheating temperature of 585 A degrees C (f (s) = 0.5). Further, increase in holding time from 5 to 15 min resulted in grain growth of alpha-Al in both the alloy and the composites. The coarsening rate constant, K, for A356-5wt%TiB2 composite was found to be 339.73 mu m(3)/s which is 32 % lower than that of semi-solid A356 alloy, thus proving the effectiveness of TiB2 particles towards grain coarsening.

引用

页码：1075 / 1080

页数：6

共 50 条

[1] Coarsening Kinetics of Semi-solid A356–5wt%TiB2 in situ Composite
S. Deepak Kumar
Mihira Acharya
A. Mandal
M. Chakraborty
[J]. Transactions of the Indian Institute of Metals, 2015, 68 : 1075 - 1080
[2] Production of semi-solid feedstock of A356 alloy and A356-5TiB2 in-situ composite by cooling slope casting
Kumar, S. Deepak
Acharya, Mihira
Mandal, A.
Chakraborty, M.
[J]. 4TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS, 2015, 75
[3] Rheological behavior of semi-solid TiB2 reinforced Al composite
Thadela, S.
Mandal, B.
Das, P.
Roy, H.
Lohar, A. K.
Samanta, S. K.
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (09) : 2827 - 2832
[4] Solid fraction evolution characteristics of semi-solid A356 alloy and in-situ A356–TiB2 composites investigated by differential thermal analysis
S.Deepak Kumar
A.Mandal
M.Chakraborty
[J]. International Journal of Minerals,Metallurgy and Materials, 2015, 22 (04) : 389 - 394
[5] Deformation Behavior of Semi-solid Forged A356-5TiB2 Nano-In Situ Composites
Kumar, Sahini Deepak
Chatttee, Ananya
Jha, Sanjay Kumar
Singh, Niranjan Kumar
Mandal, Animesh
[J]. ADVANCES IN INDUSTRIAL AND PRODUCTION ENGINEERING, 2019, : 77 - 84
[6] Microstructure and properties of in situ A356/TiB2 composite
Le Yong-kang
Chen Dong
Ma Nai-heng
Zhang Wen-jing
Mao Jian-wei
Wang Hao-wei
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1366 - S1369
[7] Microstructure and properties of in situ A356/TiB2 composite
乐永康
陈东
马乃恒
张文静
毛健伟
王浩伟
[J]. Transactions of Nonferrous Metals Society of China, 2006, (S3) : 1366 - 1369
[8] A Taguchi optimization of cooling slope casting process parameters for production of semi-solid A356 alloy and A356-5TiB2 in-situ composite feedstock
Kumar, S. Deepak
Vundavilli, Pandu R.
Mantry, Sisir
Mandal, A.
Chakraborty, M.
[J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 232 - 241
[9] Equal channel angular pressing of Al-5 wt% TiB2 in situ composite
Ravi, K. R.
Saravanan, M.
Pillai, R. M.
Mandal, A.
Murty, B. S.
Chakraborty, M.
Pai, B. C.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 459 (1-2) : 239 - 243
[10] The Effect of TiB2 Particles on the Microstructure of Semi-Solid 7075 Alloy Slurry
Gan, Gui-sheng
Yang, Bin
Wu, Huan-chuan
Han, Jun
Gao, Qian
Du, Chang-hua
[J]. MATERIALS TRANSACTIONS, 2012, 53 (06) : 1178 - 1183

← 1 2 3 4 5 →