Comparison of Performance of Shell-and-Tube Heat Exchangers with Plain and Annular-Finned Tube Bundle

被引：1

作者：

Ahmed, Asif ^{[1
]}

Bhattacharjee, Anuruddha ^{[1
]}

Saha, Sumon ^{[1
]}

机构：

[1] Bangladesh Univ Engn & Technol, Dept Mech Engn, Dhaka 1000, Bangladesh

来源：

PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED SCIENCE (ICMEAS 2017) | 2017年 / 1919卷

关键词：

PRESSURE-DROP;

D O I：

10.1063/1.5018537

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In the present study, three-dimensional (3D) numerical simulation of two segmentally baffled shell-and-tube heat exchangers (STHXs) with plain tube bundle (STHXsPT) and annular-finned tube bundle (STHXsFT) has been carried out using finite element method (FEM). A comparative study, based on the simulation results, is performed to evaluate the thermal performance and energy efficiency of both types of STHXs. Moreover, the results of the present study show that STHXsFT has around 14% higher shell-side heat transfer coefficient and improved shell-side cross flow characteristics, while STHXsPT has comparatively lower shell-side pressure drop. Besides, STHXsFT has slightly higher heat transfer coefficient per unit pressure drop compared to STHXsPT.

引用

页数：9

共 50 条

[21] TROUBLESHOOTING SHELL-AND-TUBE HEAT-EXCHANGERS
YOKELL, S
CHEMICAL ENGINEERING, 1983, 90 (15) : 57 - 75
[22] Shell-and-tube heat exchangers with a helical baffle
Chekmenev, VG
Karmanov, EV
Lebedev, VG
Golubinskii, GV
Zamidra, VN
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS, 2004, 40 (01) : 39 - 43
[23] FALLING FILM SHELL-AND-TUBE HEAT EXCHANGERS
SACK, M
CHEMICAL ENGINEERING PROGRESS, 1967, 63 (07) : 55 - &
[24] Axial dispersion in shell-and-tube heat exchangers
Roetzel, W
Balzereit, F
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2000, 39 (9-11) : 1028 - 1038
[25] Effectively design shell-and-tube heat exchangers
Mukherjee, R
CHEMICAL ENGINEERING PROGRESS, 1998, 94 (02) : 21 - 37
[26] Shell-and-Tube Heat Exchangers: The Design Cycle
Bhattacharyya, Saheli
Mukherjee, Siddhartha
CHEMICAL ENGINEERING, 2016, 123 (03) : 61 - 67
[27] DESIGNING SHELL-AND-TUBE HEAT-EXCHANGERS
FANARITIS, JP
BEVEVINO, JW
CHEMICAL ENGINEERING, 1976, 83 (14) : 62 - 71
[28] Design optimization of shell-and-tube heat exchangers
Costa, Andre L. H.
Queiroz, Eduardo M.
APPLIED THERMAL ENGINEERING, 2008, 28 (14-15) : 1798 - 1805
[29] A practical guide to shell-and-tube heat exchangers
Greene, B
HYDROCARBON PROCESSING, 1999, 78 (01): : 79 - 86
[30] Reduce fouling in shell-and-tube heat exchangers
Nesta, J
Bennett, CA
HYDROCARBON PROCESSING, 2004, 83 (07): : 77 - +

← 1 2 3 4 5 →