Cold and warm V-bending test for carbon-fiber-reinforced plastic sheet

被引：12
|
作者：
Uriya, Yu [1 ]
Ikeuch, Katsuyoshi [1 ]
Yanagimoto, Jun [2 ]
机构：
[1] Univ Tokyo, Grad Sch Engn, Meguro Ku, Tokyo 1538505, Japan
[2] Univ Tokyo, Inst Ind Sci, Meguro Ku, Tokyo 1538505, Japan
来源：
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 | 2014年 / 81卷
关键词：
Bending; Die bending; Plastic; Composite material; Springback; Fiber-reinforced plastic; HIGH-STRENGTH STEEL; TEMPERATURE; SPRINGBACK; HOT;
D O I：
10.1016/j.proeng.2014.10.203
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Although carbon-fiber-reinforced plastics (CFRPs) are the lightest and stiffest material, the use of CFRP is limited because of their higher price and lower formability than the other materials. We propose a method of stamping consolidated CFRP sheets. CFRP sheets are sandwiched by dummy metallic sheets in the stamping process. The dummy metallic sheets act as heating media, as well as protective materials for the CFRP sheets. In this paper, the springback angle of the specimens after the V-bending test under cold and warm condition was investigated and the fractures in formed CFRP sheets were observed. (C) 2014 Published by Elsevier Ltd.
引用
收藏
页码：1633 / 1638
页数：6
相关论文
共 50 条
  • [1] Cold and warm V-bending test for carbon-fiber-reinforced plastic sheet
    20150900571251
    (1) Graduate School of Engineering, University of Tokyo, 4-6-1 Komaba, Meguro-ku,Tokyo; 153-8505, Japan; (2) Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku,Tokyo; 153-8505, Japan, 1600, (Elsevier Ltd):
  • [2] Shear strength of reinforced concrete columns strengthened with carbon-fiber-reinforced plastic sheet
    Ye, LP
    Yue, QR
    Zhao, SH
    Li, QW
    JOURNAL OF STRUCTURAL ENGINEERING, 2002, 128 (12) : 1527 - 1534
  • [3] SPRINGBACK BEHAVIOR OF CARBON-FIBER-REINFORCED PLASTIC LAMINATES WITH METAL COVER LAYERS IN V-DIE BENDING
    Hahn, Marlon
    Weddeling, Christian
    Ben Khalifa, Nooman
    Shabaninejad, Arash
    PROCEEDINGS OF THE ASME 11TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2016, VOL 1, 2016,
  • [4] Springback Behavior of Carbon-Fiber-Reinforced Plastic Laminates With Metal Cover Layers in V-Die Bending
    Hahn, Marlon
    Ben Khalifa, Nooman
    Weddeling, Christian
    Shabaninejad, Arash
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (12):
  • [5] Study of V-bending deformation Characteristics of Magnesium alloy sheet in Warm Forming
    Kim, Hyun Woo
    Yu, Jea Hyeong
    Lee, Chang-Whan
    NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, 2018, 1063
  • [6] Springback Behavior of Fiber Metal Laminates with Carbon Fiber-Reinforced Core in V-Bending Process
    Ali Isiktas
    Vedat Taskin
    Arabian Journal for Science and Engineering, 2020, 45 : 9357 - 9366
  • [7] Springback Behavior of Fiber Metal Laminates with Carbon Fiber-Reinforced Core in V-Bending Process
    Isiktas, Ali
    Taskin, Vedat
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (11) : 9357 - 9366
  • [8] Bore-expanding test for thermosetting carbon-fiber-reinforced plastic sheets
    Uriya, Yu
    Yanagimoto, Jun
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2017, 10 (05) : 823 - 829
  • [9] Bore-expanding test for thermosetting carbon-fiber-reinforced plastic sheets
    Yu Uriya
    Jun Yanagimoto
    International Journal of Material Forming, 2017, 10 : 823 - 829
  • [10] FATIGUE FAILURE OF LAMINATED CARBON-FIBER-REINFORCED PLASTIC
    ANDERSON, Y
    MIKELSONS, MY
    TAMUZH, VP
    TARASHCH, IV
    MECHANICS OF COMPOSITE MATERIALS, 1991, 27 (01) : 58 - 62
12345