Thermal-hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns

被引:87
|
作者
Gholami, Ahmadali [1 ]
Wahid, MazIan A. [1 ]
Mohammed, H. A. [2 ]
机构
[1] Univ Teknol Malaysia, Fac Mech Engn, Dept Thermofluids, High Speed Reacting Flow Lab, Utm Skudai 81310, Johor, Malaysia
[2] DPU, Tech Coll Engn, Dept Energy Engn, 61 Zakho Rd, Mazi Qr 1006, Duhok Kurdistan, Iraq
关键词
Fin-and-tube compact heat exchanger; One-corrugated; Three-corrugated; Corrugated fin patterns; Heat transfer enhancement; Thermal-hydraulic performance; AIR-SIDE PERFORMANCE; FLUID-FLOW CHARACTERISTICS; WINGLET VORTEX GENERATORS; TRANSFER ENHANCEMENT; BANK FIN; PLATE-FIN; FRICTION CHARACTERISTICS; AIRSIDE PERFORMANCE; PRESSURE-DROP; SURFACES;
D O I
10.1016/j.ijheatmasstransfer.2016.09.028
中图分类号
O414.1 [热力学];
学科分类号
摘要
The flow field inside the heat exchangers is associated with maximum heat transfer, minimum pressure drop and smallest pumping power. During the recent decades, the developments in the application of longitudinal vortex generators as an effective technique and important research topic have increased the heat transfer enhancement in the design of compact heat exchangers. The main motivation of this research is to study thermal-hydraulic performance characteristics in a tube bank compact heat exchanger with introducing new design of fins and tube by using computational fluid dynamics approach. One-corrugated and three-corrugated fins with oval tubes are innovative design of the FTCHE (fin-and-tube compact heat exchanger) that promises a large leap in the development of minimized FTCHEs with increased thermal efficiency. The major advantage of such design is its ability to produce substantially increased thermal efficiency and performance criteria of FTCHE. The investigation of thermal-hydraulic performance criteria is conducted for Reynolds number in the range of 200-900. This study shows that the flow distinction between plain and corrugated fins has a profound influence on the thermal-hydrodynamic performance. The results reveal that the corrugated fins can considerably advance the thermal efficiency of the FTCHE with a moderate pressure loss penalty. The computational results indicate that the average Nusselt number for the FTCHE with corrugated fin can be increased up to 20.0% over the baseline case and the corresponding pressure difference decreased up to 19.0%. In addition, the results show that the average value of performance in one-corrugated and three-corrugated fins and oval tube compact heat exchangers up to 5% and 15% over the baseline case, respectively. The newly designed fin with oval tube shows potential improvement of heat transfer performance and moderate pressure loss in the FICHE compared with the baseline case. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:573 / 592
页数:20
相关论文
共 50 条
  • [21] INNOVATIVE FIN DESIGNS FOR ENHANCING THE AIRSIDE PERFORMANCE OF FIN-AND-FLAT TUBE HEAT EXCHANGERS
    Sadeghianjahromi, Ali
    Sulaiman, Mohammed W.
    Sajjad, Uzair
    Wang, Chi-Chuan
    [J]. JOURNAL OF ENHANCED HEAT TRANSFER, 2021, 28 (01) : 1 - 32
  • [22] A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations
    Han, Hui
    He, Ya-Ling
    Li, Yin-Shi
    Wang, Yu
    Wu, Ming
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 65 : 686 - 695
  • [23] On correction factors in thermal-hydraulic correlations for compact fin-tube bundles
    Karl Lindqvist
    Erling Næss
    [J]. Heat and Mass Transfer, 2020, 56 : 1713 - 1723
  • [24] FROSTING PERFORMANCE OF TUBE FIN HEAT-EXCHANGERS WITH WAVY AND CORRUGATED FINS
    KONDEPUDI, SN
    ONEAL, DL
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1991, 4 (05) : 613 - 618
  • [25] On correction factors in thermal-hydraulic correlations for compact fin-tube bundles
    Lindqvist, Karl
    Naess, Erling
    [J]. HEAT AND MASS TRANSFER, 2020, 56 (06) : 1713 - 1723
  • [26] A model for predicting the thermal-hydraulic performance of louvered-fin, flat-tube heat exchangers under frosting conditions
    Xia, Y.
    Jacobi, A. M.
    [J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2010, 33 (02): : 321 - 333
  • [27] An airside performance of the wavy fin-and-tube heat exchangers having oval tubes
    Kim, Nae-Hyun
    Kim, Cheol-Hwan
    Han, Ho-Seung
    [J]. APPLIED THERMAL ENGINEERING, 2021, 190
  • [28] Comparative Performance of Rippled Fin Plate Fin and Tube Heat Exchangers
    Maltson, J. D.
    Wilcock, D.
    Davenport, C. J.
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1989, 111 (1-4): : 21 - 28
  • [29] A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers
    Liao, Gaoliang
    Li, Zhizhou
    Zhang, Feng
    Liu, Lijun
    E, Jiaqiang
    [J]. ENERGIES, 2021, 14 (19)
  • [30] Effect of a micro-grooved fin surface design on the air-side thermal-hydraulic performance of a plain fin-and-tube heat exchanger
    Yu, R.
    Sommers, A. D.
    Okamoto, N. C.
    [J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (03): : 1078 - 1089