Study of the Crystallization and Melting Behavior of a Latent Heat Storage by Computed Tomography

被引：5
|
作者：
Kohler, Tobias [1 ]
Koegl, Thilo [1 ]
Mueller, Karsten [1 ]
机构：
[1] Friedrich Alexander Univ Erlangen Nurnberg FAU, Inst Separat Sci & Technol, Egerlandstr 3, D-91058 Erlangen, Germany
来源：
CHEMIE INGENIEUR TECHNIK | 2018年 / 90卷 / 03期
关键词：
Computed tomography; Phase change material; Thermal energy storage; MAGNESIUM-CHLORIDE HEXAHYDRATE; IMMERSION CORROSION TESTS; THERMAL-ENERGY STORAGE; 36-DEGREES-C TEMPERATURE-RANGE; PHASE-CHANGE MATERIALS; SYSTEM; PCM; 32-DEGREES-C; MGCL2.6H2O;
D O I：
10.1002/cite.201700096
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Thermal energy storage based on phase changes is a promising technology. However, heat transfer can often be problematic. A latent heat storage based on the single tube design is analyzed in a computer tomograph. The different densities of the solid and liquid phase change material (PCM) MgCl(2)6H(2)O enable a clear identification of the phases in the computer tomographic images. No supercooling or phase segregation of water from the PCM was observed during melting or crystallization. The volume change, though often neglected, seems to be the biggest issue of the design of latent heat storage systems.
引用
收藏
页码：366 / 371
页数：6
相关论文
共 50 条
  • [41] Fire behavior of regular and latent heat storage gypsum boards
    Kontogeorgos, D. A.
    Mandilaras, I. D.
    Founti, M. A.
    FIRE AND MATERIALS, 2015, 39 (05) : 507 - 517
  • [42] Heat storage and release behavior in a thin vessel heat storage unit using salt hydrate latent heat storage material
    Haruki, Naoto
    Horibe, Akihiko
    Yamada, Yutaka
    HEAT AND MASS TRANSFER, 2019, 55 (10) : 2797 - 2807
  • [43] Heat storage and release behavior in a thin vessel heat storage unit using salt hydrate latent heat storage material
    Naoto Haruki
    Akihiko Horibe
    Yutaka Yamada
    Heat and Mass Transfer, 2019, 55 : 2797 - 2807
  • [44] Numerical study of melting and solidification in a wavy double-pipe latent heat thermal energy storage system
    Shahsavar, Amin
    Ali, Hafiz Muhammad
    Mahani, Roohollah Babaei
    Talebizadehsardari, Pouyan
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2020, 141 (05) : 1785 - 1799
  • [45] Melting process enhancement in double pipe storage with multiple latent heat storage materials and oriented fins
    Sayoud, Nessrine
    Laouer, Abdelghani
    Brihi, Noureddine
    Teggar, Mohamed
    Arici, Muslum
    JOURNAL OF ENERGY STORAGE, 2024, 85
  • [46] Melting dynamics analysis of a multi-tube latent heat thermal energy storage system: Numerical study
    Vikas
    Yadav, Ankit
    Samir, Sushant
    Applied Thermal Engineering, 2022, 214
  • [47] Numerical study of melting and solidification in a wavy double-pipe latent heat thermal energy storage system
    Amin Shahsavar
    Hafiz Muhammad Ali
    Roohollah Babaei Mahani
    Pouyan Talebizadehsardari
    Journal of Thermal Analysis and Calorimetry, 2020, 141 : 1785 - 1799
  • [48] Numerical study of MWCNT enhanced PCM melting through a heated undulated wall in the latent heat storage unit
    Gupta, Anoop K.
    Mishra, Garima
    Singh, Shikha
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2022, 27
  • [49] Melting dynamics analysis of a multi-tube latent heat thermal energy storage system: Numerical study
    Vikas
    Yadav, Ankit
    Samir, Sushant
    APPLIED THERMAL ENGINEERING, 2022, 214
  • [50] Natural convection improvement of PCM melting in partition latent heat energy storage: Numerical study with experimental validation
    Mahdi, Mustafa S.
    Mahood, Hameed B.
    Campbell, Alasdair N.
    Khadom, Anees A.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2021, 126
12345