Crystalline phases and physical properties of modified stoneware body with glaze sludge

被引：6
|
作者：
Wannagon, Anucha [1 ]
Sornlar, Watcharee [1 ]
Choeycharoen, Pattarawan [1 ]
机构：
[1] Natl Met & Mat Technol Ctr, Klongluang 12120, Pathumthani, Thailand
来源：
CERAMICS INTERNATIONAL | 2012年 / 38卷 / 06期
关键词：
Stoneware body; Glaze sludge; Glass cullet; Low firing temperature; Crystalline phase; GLASS;
D O I：
10.1016/j.ceramint.2012.02.024
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ceramic stoneware body has been modified with ceramic and glass industrial wastes by replacing 25-100% as flux in the formula. The effects of solid wastes added to the bodies were studied after firing in the temperature range 950-1280 degrees C. The physical properties of linear shrinkage, bulk density, apparent porosity, water absorption and 3-point bending strength were determined. A composition which related to the general stoneware properties was found when using soda-lime cullet and glaze sludge. It had a firing range lowered to 1050-1100 degrees C. SEM results demonstrated the sintered microstructure increased in density with increase in solid waste in the modified body. XRD results after firing showed the crystalline phases comprised of mullite, albite calcian and quartz. Thermal expansion was measured in the range 6.53-6.67 x 10(-6) K-1 at 30-500 degrees C. The modified bodies were capable of forming prototype products by slip casting and jiggering. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：4485 / 4494
页数：10
相关论文
共 50 条
  • [1] Content of crystalline silica phases in porcelain stoneware
    Molinari, Chiara
    Conte, Sonia
    Dondi, Michele
    Zanelli, Chiara
    [J]. OPEN CERAMICS, 2024, 19
  • [2] Evolution with Temperature of Crystalline and Amorphous Phases in Porcelain Stoneware
    Martin-Marquez, Jorge
    De la Torre, Angeles G.
    Aranda, Miguel A. G.
    Ma Rincon, Jesus
    Romero, Maximina
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2009, 92 (01) : 229 - 234
  • [3] Influence of composition of body and glaze on the physical properties of a true porcelain
    Lee, PW
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1926, 9 (02) : 97 - 103
  • [4] Some physical properties of chemical stoneware bodies
    MacGee, AE
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1927, 10 (08) : 569 - 578
  • [5] Characterization of Li-Zn-Fe crystalline phases in low temperature ceramic glaze
    Wannagon, Anucha
    Prasanphan, Sitthisak
    Sanguanpak, Samunya
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (04) : 653 - 660
  • [6] Physical and Mechanical Properties of Sintered Clay Body Mixed with Sewage Sludge
    Zhao, Yading
    Wang, Zhiyu
    Ma, Cailong
    [J]. ADVANCED BUILDING MATERIALS AND SUSTAINABLE ARCHITECTURE, PTS 1-4, 2012, 174-177 : 860 - 863
  • [7] Effect of glaze film on properties of a vitreous china body
    Bell, WC
    Koenig, JH
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1941, 24 (11) : 341 - 348
  • [8] Development of a glass-ceramic glaze formulated from industrial residues to improve the mechanical properties of the porcelain stoneware tiles
    Barrachina, E.
    Esquinas, M.
    Llop, J.
    Notari, M. D.
    Carda, J. B.
    [J]. MATERIALS LETTERS, 2018, 220 : 226 - 228
  • [9] EFFECT OF RESIDUAL COMPRESSIVE STRESS IN A HOTEL-CHINA GLAZE ON SOME PHYSICAL DURABILITY PROPERTIES OF THE GLAZE
    KOCH, WJ
    HARMAN, CG
    OBANNON, LS
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1952, 35 (09) : 240 - 242
  • [10] THE DEPENDENCE OF DNA LIQUID-CRYSTALLINE PHASES ON THE CONTOUR LENGTH AND OTHER PHYSICAL-PROPERTIES
    MERCHANT, K
    RILL, RL
    [J]. BIOPHYSICAL JOURNAL, 1994, 66 (02) : A159 - A159
12345