Optimization of drilling parameters in hybrid (Al6061/SiC/B4C/talc) composites by grey relational analysis (vol 41, 155, 2019)

被引：0

作者：

Kumar, C. Ramesh ^{[1
]}

JaiGanesh, V. ^{[2
]}

Malarvannan, R. Ravi Raja ^{[3
]}

机构：

[1] Sriram Engn Coll, Dept Mech Engn, Chennai, Tamil Nadu, India

[2] SA Engn Coll, Dept Mech Engn, Chennai, Tamil Nadu, India

[3] Saveetha Engn Coll, Dept Mech Engn, Chennai, Tamil Nadu, India

来源：

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | 2019年 / 41卷 / 04期

关键词：

D O I：

10.1007/s40430-019-1694-y

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In the original version of this article, the contents of the Table 2 were incorrectly published. This is a corrected version of the Table 2.

引用

页数：2

共 50 条

[31] Electrical Discharge Machining of Al (6351)-5% SiC-10% B4C Hybrid Composite: A Grey Relational Approach
Kumar, S. Suresh
Uthayakumar, M.
Kumaran, S. Thirumalai
Parameswaran, P.
Mohandas, E.
MODELLING AND SIMULATION IN ENGINEERING, 2014, 2014 (2014)
[32] Hardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC
Yahya Hişman Çelik
Erol Kilickap
Powder Metallurgy and Metal Ceramics, 2019, 57 : 613 - 622
[33] Hardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC
Celik, Yahya Hisman
Kilickap, Erol
POWDER METALLURGY AND METAL CERAMICS, 2019, 57 (9-10) : 613 - 622
[34] Drilling of Al2219/B4C/Gr metal matrix hybrid composites
Ravindranath, V. M.
Yerriswamy, M.
Vivek, S. V.
Shankar, G. S. Shiva
Kumar, Siddesh N. G.
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (09) : 9898 - 9901
[35] En extensive analysis of mechanical and tribological studies of Al6061 alloy based hybrid composite reinforced with B4C and Graphene
Tripathy, Santosh Kumar
Senapati, Ajit Kumar
MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 2808 - 2812
[36] Examination of the effect of B4C and GNP reinforcements on machinability in the machining of Al 6061 matrix B4C/GNP reinforced hybrid composites
Pul, Muharrem
Yagmur, Selcuk
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2022, 44 (10)
[37] Examination of the effect of B4C and GNP reinforcements on machinability in the machining of Al 6061 matrix B4C/GNP reinforced hybrid composites
Muharrem Pul
Selçuk Yağmur
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
[38] Influence of B4C/BN on solid particle erosion of Al6061 metal matrix hybrid composites fabricated through powder metallurgy technique
Chand, Sudipta
Chandrasekhar, Polymersetty
CERAMICS INTERNATIONAL, 2020, 46 (11) : 17621 - 17630
[39] Numerical Analysis of Hot Extrusion Deformation of B4C/6061Al Composites
Cao Y.
Du J.
Wang B.
Zhou L.
Journal of The Institution of Engineers (India): Series C, 2023, 104 (04) : 815 - 827
[40] Rate-Dependent Compressive Behaviour of SiC−B4C−Al Hybrid Composites
Physics of Metals and Metallography, 2023, 124 : 1567 - 1578

← 1 2 3 4 5 →