Investigation on pressure drop characteristic and mass transfer performance of gas-liquid flow in micro-channels

被引:19
|
作者
Wang, Xi [1 ]
Yong, Yumei [1 ]
Yang, Chao [1 ]
Mao, Zai-Sha [1 ]
Li, Dandan [1 ]
机构
[1] Chinese Acad Sci, Inst Proc Engn, Natl Key Lab Biochem Engn, Key Lab Green Proc & Engn, Beijing 100190, Peoples R China
基金
中国国家自然科学基金;
关键词
Friction pressure drop; Mass transfer; Micro-channel; Multiphase flow; Wettability; 2-PHASE FLOW; VOID FRACTION; MICROCHANNELS; PATTERN; TRANSITION; BUBBLES; SLIP;
D O I
10.1007/s10404-013-1226-5
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Pressure drop characteristics and mass transfer performance of gas-liquid two-phase flow in micro-channels with different surface wettabilities were experimentally investigated. Side-entry T micro-channel mixers made of glass and polydimethylsiloxane were tested. Frictional pressure drop was found to decrease as the hydrophobicity of the channel surface increased. The flow patterns observed in the experiment were classified as slug flow and continuous gas phase flows. The modified Hagen-Poiseuille equation and Lockhart-Martinelli model were developed to predict the pressure drop for these two types of flow, respectively. The effect of surface wettability was heuristically incorporated in the present models which can correlate well the experimental results. Mass transfer performance was studied by the physical absorption of oxygen into de-ionized water. The results show that the volumetric mass transfer coefficients in hydrophobic micro-channels are generally higher than those in hydrophilic ones. The empirical correlations of overall volumetric mass transfer coefficients were proposed.
引用
收藏
页码:413 / 423
页数:11
相关论文
共 50 条
  • [21] Gas-liquid two-phase flow distribution in parallel micro-channels with different header and channels' orientations
    Liu, Yanchu
    Sun, Wanchun
    Wu, Wei
    Wang, Shuangfeng
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 112 : 767 - 778
  • [22] Analysing Gas-Liquid Flow in PEM Electrolyser Micro-Channels using a Micro-Porous Ceramic as Gas Permeable wall
    Lafmejani, S. S.
    Olesen, A. C.
    Al Shakhshir, S.
    Kaer, S. K.
    POLYMER ELECTROLYTE FUEL CELLS 17 (PEFC 17), 2017, 80 (08): : 1107 - 1115
  • [23] Mass transfer performance of gas-liquid segmented flow in microchannels
    Tan, J.
    Lu, Y. C.
    Xu, J. H.
    Luo, G. S.
    CHEMICAL ENGINEERING JOURNAL, 2012, 181 : 229 - 235
  • [24] Flow pattern and pressure drop of vertical upward gas-liquid flow in sinusoidal wavy channels
    Nilpueng, Kitti
    Wongwises, Somchai
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2006, 30 (06) : 523 - 534
  • [25] A comprehensive review on heat transfer enhancement and pressure drop characteristics of nanofluid flow through micro-channels
    Chauhan, Prathvi Raj
    Kumar, Rajan
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2018, 42 (03): : 363 - 385
  • [26] Flow Pattern, Pressure Drop, and Mass Transfer in a Gas-Liquid Concurrent Two-Phase Flow Microchannel Reactor
    Niu, Haining
    Pan, Liwei
    Su, Hongjiu
    Wang, Shudong
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2009, 48 (03) : 1621 - 1628
  • [27] Experimental Study on Flow Boiling Pressure Drop and Flow Instabilities of Reentrant Micro-channels
    Deng, D.
    Huang, Q.
    Wan, W.
    Zhou, W.
    Lian, Y.
    EXPERIMENTAL HEAT TRANSFER, 2016, 29 (06) : 811 - 832
  • [28] Effect of flow instability on flow boiling friction pressure drop in parallel micro-channels
    Li, Xuejiao
    Jia, Li
    Dang, Chao
    An, Zhoujian
    Huang, Qian
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2018, 97 : 64 - 71
  • [29] Mass transfer characteristic in the formation stage of gas-liquid segmented flow in microchannel
    Tan, J.
    Lu, Y. C.
    Xu, J. H.
    Luo, G. S.
    CHEMICAL ENGINEERING JOURNAL, 2012, 185 : 314 - 320
  • [30] GAS-FLOW IN MICRO-CHANNELS
    HARLEY, JC
    HUANG, YF
    BAU, HH
    ZEMEL, JN
    JOURNAL OF FLUID MECHANICS, 1995, 284 : 257 - 274