Detecting cavitation inception in external gear pumps by means of vibro-acoustic measurements

被引：0

作者：

Battarra, M. ^{[1
]}

Mucchi, E. ^{[1
]}

机构：

[1] Univ Ferrara, Engn Dept, Via G Saragat 1, I-44122 Ferrara, Italy

来源：

PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) | 2018年

关键词：

CENTRIFUGAL; VIBRATION; OPERATION;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The present work investigates cavitation in external gear machines by means of a dedicated experimental campaign. Four different pump prototypes have been designed and manufactured to perform this research, one of them specifically built up to not be affected by such a phenomenon. Vibro-acoustic measurements performed by a hydrophone and a high-frequency accelerometer are put in comparison with measurements of inlet and outlet pressure ripple, in order to enlighten their capability to follow the development of the phenomenon. Waterfall spectra are investigated and later Root Mean Square (RMS) values of the filtered signals are shown with respect to the cavitation number and compared with efficiency measurements. Results demonstrate that vibro-acoustic measurements associated to a dedicated signal processing procedure represent a powerful tool to detect cavitation inception in gear pumps. In addition, effect of oil temperature is investigated, showing its contribution in spreading the phenomenon on a wider speed range.

引用

页码：1309 / 1322

页数：14

共 44 条

[31] Internal combustion engine lubricating oil condition monitoring based on vibro-acoustic measurements
Albarbar, A.
Gu, F.
Ball, A.
Starr, A.
[J]. INSIGHT, 2007, 49 (12) : 715 - 718
[32] Vibro-acoustic response of an elliptical plate-cavity coupled system to external shock loads
Hasheminejad, Seyyed M.
Shakeri, Rezgar
Rezaei, Shahed
[J]. APPLIED ACOUSTICS, 2012, 73 (08) : 757 - 769
[33] Vibro-acoustic characteristics of gear-rotor-bearing coupled system under multi-source excitation
Wang, Shengnan
Zhou, Jianxing
Xieeryazidan, Adayi
[J]. JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, 2023, 42 (02) : 539 - 557
[34] Prediction of leak flow rate in plastic water distribution pipes using vibro-acoustic measurements
Butterfield, Joseph D.
Meruane, Viviana
Collins, Richard P.
Meyers, Gregory
Beck, Stephen B. M.
[J]. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2018, 17 (04): : 959 - 970
[35] Effects of concentrated elements on vibro-acoustic characteristics of a circular ring considering both external and internal fluids
Niu, Mingchang
Huang, Yuhong
Su, Jinpeng
Hua, Hongxing
[J]. JOURNAL OF VIBRATION AND CONTROL, 2022, 28 (1-2) : 104 - 114
[36] Vibro-acoustic modulation based measurements in CFRP laminates for damage detection in Open-Hole structures
Willmann, Erik
Boll, Benjamin
Mikaelyan, Gor
Wittich, Hans
Meissner, Robert Horst
Fiedler, Bodo
[J]. COMPOSITES COMMUNICATIONS, 2023, 42
[37] Health monitoring of CFRP laminates under cyclic loading via vibro-acoustic modulation based measurements
Willmann, Erik
Boll, Benjamin
Scheel, Moritz
Meissner, Robert Horst
Fiedler, Bodo
[J]. COMPOSITE STRUCTURES, 2023, 308
[38] User-friendly nonlinear nonparametric estimation framework for vibro-acoustic industrial measurements with multiple inputs
Csurcsia, Peter Zoltan
Peeters, Bart
Schoukens, Johan
[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2020, 145
[39] On the accuracy reciprocal and direct vibro-acoustic transfer-function measurements on vehicles for lower and medium frequencies
Coster, C.
Nagahata, D.
van der Linden, P. J. G.
[J]. PROCEEDINGS OF ISMA2010 - INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING INCLUDING USD2010, 2010, : 3873 - 3886
[40] Vibroacoustic Measurements and Simulations Applied to External Gear Pumps. An Integrated Simplified Approach
Carletti, Eleonora
Miccoli, Giuseppe
Pedrielli, Francesca
Parise, Giorgio
[J]. ARCHIVES OF ACOUSTICS, 2016, 41 (02) : 285 - 296

← 1 2 3 4 5 →