Detecting cavitation inception in external gear pumps by means of vibro-acoustic measurements

被引：0

作者：

Battarra, M. ^{[1
]}

Mucchi, E. ^{[1
]}

机构：

[1] Univ Ferrara, Engn Dept, Via G Saragat 1, I-44122 Ferrara, Italy

来源：

PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) | 2018年

关键词：

CENTRIFUGAL; VIBRATION; OPERATION;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The present work investigates cavitation in external gear machines by means of a dedicated experimental campaign. Four different pump prototypes have been designed and manufactured to perform this research, one of them specifically built up to not be affected by such a phenomenon. Vibro-acoustic measurements performed by a hydrophone and a high-frequency accelerometer are put in comparison with measurements of inlet and outlet pressure ripple, in order to enlighten their capability to follow the development of the phenomenon. Waterfall spectra are investigated and later Root Mean Square (RMS) values of the filtered signals are shown with respect to the cavitation number and compared with efficiency measurements. Results demonstrate that vibro-acoustic measurements associated to a dedicated signal processing procedure represent a powerful tool to detect cavitation inception in gear pumps. In addition, effect of oil temperature is investigated, showing its contribution in spreading the phenomenon on a wider speed range.

引用

页码：1309 / 1322

页数：14

共 44 条

[1] Incipient cavitation detection in external gear pumps by means of vibro-acoustic measurements
Battarra, Mattia
Mucchi, Emiliano
[J]. MEASUREMENT, 2018, 129 : 51 - 61
[2] AN ASSESSED MODEL FOR THE VIBRO-ACOUSTIC ANALYSIS OF GEAR PUMPS
Mucchi, Emiliano
Dalpiaz, Giorgio
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 5, 2014,
[3] Numerical vibro-acoustic analysis of gear pumps for automotive applications
Mucchi, E.
Dalpiaz, G.
[J]. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012), 2012, : 3951 - 3961
[4] Methods for vibro-acoustic diagnostics of turbine cavitation
Bajic, B
[J]. JOURNAL OF HYDRAULIC RESEARCH, 2003, 41 (01) : 87 - 96
[5] VIBRO-ACOUSTIC ANALYSIS OF A SIMPLE GEAR BOX
Park, Chan Il
Rong, Linguo
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 5, 2014,
[6] Acoustic analysis of cavitation inception from centrifugal pumps
Ladhari, A.
Dick, E.
Vierendeels, J.
Martens, J.-P.
Riemslagh, K.
[J]. European Journal of Mechanical and Environmental Engineering, 2001, 46 (01): : 23 - 32
[7] Vibro-acoustic propagation of gear dynamics in a gear-bearing-housing system
Guo, Yi
Eritenel, Tugan
Ericson, Tristan M.
Parker, Robert G.
[J]. JOURNAL OF SOUND AND VIBRATION, 2014, 333 (22) : 5762 - 5785
[8] Influence of the vibro-acoustic sensor position on cavitation detection in a Kaplan turbine
Schmidt, H.
Kirschner, O.
Riedelbauch, S.
Necker, J.
Kopf, E.
Rieg, M.
Arantes, G.
Wessiak, M.
Mayrhuber, J.
[J]. 27TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS (IAHR 2014), PTS 1-7, 2014, 22
[9] Numerical Analysis of External Gear Pumps Including Cavitation
del Campo, D.
Castilla, R.
Raush, G. A.
Gamez Montero, P. J.
Codina, E.
[J]. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2012, 134 (08):
[10] Pressure effects on the performance of external gear pumps under cavitation
del Campo, David
Castilla, R.
Raush, G. A.
Gamez-Montero, P. J.
Codina, E.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2014, 228 (16) : 2925 - 2937

← 1 2 3 4 5 →