Tribological properties of Ni-Cr-W Matrix High Temperature Self-lubrication Composites Sintered by Hot Isostatic Pressing

被引：0

作者：

Sun, Jianrong ^{[2
]}

Li, Changsheng ^{[1
]}

Tang, Hua ^{[1
]}

Liu, Jinyinzi ^{[1
]}

Guo, Zhicheng ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China

[2] Jiangsu Univ, Sch Mech & Engn, Zhenjiang 212013, Peoples R China

来源：

HYDRAULIC EQUIPMENT AND SUPPORT SYSTEMS FOR MINING | 2013年 / 619卷

关键词：

High temperature; Self-lubrication; Powder metallurgy; Ni-W-Cr; HIP; ELEVATED-TEMPERATURES; WEAR; FILMS; WATER;

D O I：

10.4028/www.scientific.net/AMR.619.531

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The high temperature self-lubrication Ni-Cr-W matrix composites were prepared by powder metallurgy and sintered by hot isostatic pressing (HIP). Atomized Ni-Cr-W powder was mixed with friction components of MoS2 and Graphite. The mixed powders were cold pressed 450MPa and sintered at 1100 degrees C similar to 1200 degrees C in the presence of argon atmosphere for 1 hour under 180MPa hot isostatic pressing with respect to their application in slide bearing bushing. The tribological properties are investigated on UMT-2 tester in ball-on-disc against alloy steel ball. The results showed that the appropriate addition of MoS2 show excellent antifriction and wear resistance. And the friction coefficients and wear rates decrease over the wide temperature range of 25 degrees C similar to 600 degrees C compared that of the composites by pressureless sintered method. The results indicated that HIP technology had an obviously strengthening effect on the density, and anti-press strength.

引用

页码：531 / +

页数：2

共 50 条

[31] Microstructure and tribological properties of Cr3C2/Ni3Al composite materials prepared by hot isostatic pressing (HIP)
Fu, Lihua
Han, Wei
Gong, Karin
Bengtsson, Sven
Dong, Chaofang
Zhao, Lin
Tian, Zhiling
MATERIALS & DESIGN, 2017, 115 : 203 - 212
[32] Sintered Coatings with directly cured, highly wear-resistant Metal Matrix Composites An Alternative to hot isostatic Pressing Discussion
不详
HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2009, 64 (02): : 106 - 106
[33] Effect of Hot Isostatic Pressing Temperature on Microstructure and Mechanical Properties of 14Cr-ODS Steel
Xie R.
Lyu Z.
Lu C.
Wang Q.
Xu S.
Liu C.
Cailiao Daobao/Materials Reports, 2020, 34 (04): : 08141 - 08148
[34] Influence of hot isostatic pressing on microstructures and properties of NiAl/Cr(Mo)-TiC in-situ multiphase composites
Jiang, DT
Guo, JT
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 1998, 14 (04) : 331 - 334
[35] Processing, structure and properties of Ni-W alloys fabricated by mechanical alloying and hot-isostatic pressing
Mi, S
Courtney, TH
SCRIPTA MATERIALIA, 1998, 38 (04) : 637 - 644
[36] Microstructure and tribological properties of laser cladding Ni45-CaF2-WS2 self-lubrication coating
State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
Zhongguo Youse Jinshu Xuebao, 2008, 2 (215-220):
[37] Investigation of corrosion and wear properties of Fe based metal matrix composites consolidated by sintering and hot isostatic pressing
Hill, H.
Weber, S.
Siebert, S.
Theisen, W.
POWDER METALLURGY, 2011, 54 (03) : 455 - 462
[38] Self-lubrication of high-entropy carbide matrix composites over a wide temperature range: The synergistic effect of silver and molybdenum component
Zhu, Zongxiao
Chen, Wenbang
Bian, Zhiao
Sun, Qichun
Zheng, Min
Zhu, Shengyu
Cheng, Jun
Yang, Jun
WEAR, 2024, 546
[39] Effects of wear characteristics of Ni3Al metal matrix self-lubrication composites on friction-induced vibration and noise properties
Lu, Guanchen
Shi, Xiaoliang
Liu, Xiyao
Zhou, Hongyan
Chen, Yuan
MATERIALS RESEARCH EXPRESS, 2019, 6 (05)
[40] Joining of self-passivating W-Cr-Y alloy to ferritic-martensitic steel by hot isostatic pressing
Sal, E.
de Prado, J.
Sanchez, M.
Urena, A.
Garcia-Rosales, C.
FUSION ENGINEERING AND DESIGN, 2021, 170

← 1 2 3 4 5 →