Pad Wear Analysis during Interlayer Dielectric Chemical Mechanical Planarization

被引：1

作者：

Jiao, Yubo ^{[1
]}

Zhuang, Yun ^{[1
,2
]}

Wei, Xiaomin ^{[1
]}

Sampurno, Yasa ^{[1
,2
]}

Meled, Anand ^{[1
]}

Theng, Siannie ^{[2
]}

Cheng, Jiang ^{[1
]}

Hooper, Don ^{[3
]}

Moinpour, Mansour ^{[4
]}

Philipossian, Ara ^{[1
,2
]}

机构：

[1] Univ Arizona, Dept Chem & Environm Engn, Tucson, AZ 85721 USA

[2] Araca Inc, Tucson, AZ 85718 USA

[3] Intel Corp, Rio Rancho, NM 87124 USA

[4] Intel Corp, Santa Clara, CA 95054 USA

来源：

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY | 2012年 / 1卷 / 05期

关键词：

D O I：

10.1149/2.022205jss

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, pad wear during interlayer dielectric (ILD) chemical mechanical planarization (CMP) was investigated using retaining rings with differentmaterials and slot designs as well as pads with differentmaterials at different platen temperatures. Results showed that the retaining ring slot design did not significantly affect the pad wear rate. On the other hand, the polyether ether ketone (PEEK) retaining ring exhibited a significantly lower pad wear rate (by 31%) than the polyphenylene sulfide (PPS) retaining ring. At both platen temperatures (25 and 50 degrees C), the thermoplastic D100 pad exhibited lower pad wear rates than the thermoset IC1000 pad. (C) 2012 The Electrochemical Society. All rights reserved.

引用

页码：N103 / N105

页数：3

共 50 条

[1] Effect of Pad Groove Design on Slurry Injection Scheme during Interlayer Dielectric Chemical Mechanical Planarization
Wu, C.
Sampurno, Y.
Liao, X.
Zhuang, Y.
Borucki, L.
Theng, S.
Philipossian, A.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2015, 4 (07) : P272 - P276
[2] Effect of Pad Surface Micro-Texture on Removal Rate during Interlayer Dielectric Chemical Mechanical Planarization Process
Liao, Xiaoyan
Zhuang, Yun
Borucki, Leonard J.
Cheng, Jiang
Theng, Siannie
Ashizawa, Toranosuke
Philipossian, Ara
JAPANESE JOURNAL OF APPLIED PHYSICS, 2013, 52 (01)
[3] Analysis of a theoretical model for the effect of pad conditioning on pad wear in chemical mechanical polishing for planarization
McGrath, J
Davis, C
Townsend, N
McGrath, J
ADVANCES IN MANUFACTURING TECHNOLOGY-XVI, 2001, : 411 - 415
[4] Development and analysis of a high-pressure micro jet pad conditioning system for interlayer dielectric chemical mechanical planarization
Seike, Y
DeNardis, D
Sugiyama, M
Miyachi, K
Doi, T
Philipossian, A
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2005, 44 (03): : 1225 - 1231
[5] Development and analysis of a high-pressure micro jet pad conditioning system for interlayer dielectric chemical mechanical planarization
Seike, Yoshiyuki
Denardis, Darren
Sugiyama, Masano
Miyachi, Keiji
Doi, Toshiro
Philipossian, Ara
Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 2005, 44 (03): : 1225 - 1231
[6] Effect of conditioner disc wear on frictional, thermal, kinetic and pad micro-textural attributes of interlayer dielectric and tungsten chemical mechanical planarization
Mariscal, Juan Cristobal
Dadashazar, Hossein
McAllister, Jeffrey
Sampurno, Yasa
Philipossian, Ara
JAPANESE JOURNAL OF APPLIED PHYSICS, 2020, 59
[7] Slurry-Induced Pad Wear Rate in Chemical Mechanical Planarization
Meled, Anand
Sampurno, Yasa
Zhuang, Yun
Philipossiana, Ara
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2010, 13 (03) : H52 - H54
[8] Aggressive Diamond Characterization and Wear Analysis during Chemical Mechanical Planarization
Philipossian, A.
Wu, C.
Zhuang, Y.
Liao, X.
Jiao, Y.
Sampurno, Y.
Theng, S.
Sun, F.
Naman, A.
CHINA SEMICONDUCTOR TECHNOLOGY INTERNATIONAL CONFERENCE 2013 (CSTIC 2013), 2013, 52 (01): : 597 - 603
[9] Aggressive Diamond Characterization and Wear Analysis during Chemical Mechanical Planarization
Wu, Changhong
Zhuang, Yun
Liao, Xiaoyan
Jiao, Yubo
Sampurno, Yasa Adi
Theng, Siannie
Sun, Fred
Naman, Ananth
Philipossian, Ara
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2013, 2 (01) : P36 - P41
[10] Effect of process conditions on uniformity of velocity and wear distance of pad and wafer during chemical mechanical planarization
Hyoungjae Kim
Haedo Jeong
Journal of Electronic Materials, 2004, 33 : 53 - 60

← 1 2 3 4 5 →