Advanced development of IBAD/PLD coated conductors at FUJIKURA

被引：29

作者：

Igarashi, M. ^{[1
]}

Kakimoto, K. ^{[1
]}

Hanyu, S. ^{[1
]}

Kikutake, R. ^{[1
]}

Sutoh, Y. ^{[1
]}

Suzuki, R. ^{[1
]}

Daibo, M. ^{[1
]}

Fuji, H. ^{[1
]}

Kutami, H. ^{[1
]}

Iijima, Y. ^{[1
]}

Itoh, M. ^{[1
]}

Saitoh, T. ^{[1
]}

机构：

[1] Fujikura Ltd, Sakura, Chiba 2858550, Japan

来源：

SUPERCONDUCTIVITY CENTENNIAL CONFERENCE 2011 | 2012年 / 36卷

关键词：

RE123 coated conductor; cricical current; unifromity; I-c x L value; in -field performance;

D O I：

10.1016/j.phpro.2012.06.145

中图分类号：

O412 [相对论、场论]; O572.2 [粒子物理学];

学科分类号：

摘要：

We have developed an ion-beam-assisted-deposition (IBAD) and a pulsed-laser-deposition (PLD) technique to produce REBa2Cu3Ox (RE123, RE: rare earth) coated conductors with high performances. Distributions of critical currents (I-c) in the longitudinal direction were improves in most wires routinely fabricated under optimized process. A typical wire showed I-c of 460 A/cm at 77 K and self-field, about 200 A/cm at 65 K and 3 T and about 300 A/cm at 50 K and 5 T. In addition, further high I-c values over 800 A/cm were also obtained in thick films. Finally, we succeeded in fabricating an 816.4 m long wire with end-to-end I-c of 572 A/cm, corresponding to the new world record I-c x L value of 466,981 A/cm. (C) 2012 Published by Elsevier B.V. Selection and/or peer-review under responsibility of the Guest Editors.

引用

页码：1412 / 1416

页数：5

共 50 条

[21] Development of Y-123-coated conductors by IBAD process
Iijima, Y
Kimura, M
Saitoh, T
Takeda, K
PHYSICA C, 2000, 335 (1-4): : 15 - 19
[22] Fabrication and transport characteristics of long length Y-123 coated conductors processed by IBAD and PLD
Iijima, Y
Kakimoto, K
Saitoh, T
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2003, 13 (02) : 2466 - 2469
[23] Development for Mass Production of Homogeneous RE123 Coated Conductors by Hot-Wall PLD Process on IBAD Template Technique
Iijima, Y.
Adachi, Y.
Fujita, S.
Igarashi, M.
Kakimoto, K.
Ohsugi, M.
Nakamura, N.
Hanyu, S.
Kikutake, R.
Daibo, M.
Nagata, M.
Tateno, F.
Itoh, M.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2015, 25 (03)
[24] Development of Long REBCO Coated Conductors by PLD-REBCO/Sputter-CeO2/IBAD-MgO at SJTU and SSTC
Liu, L.
Li, Y.
Wu, X.
Xiao, G.
Xu, D.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2015, 25 (03)
[25] Long IBAD-MgO and PLD coated conductor
Yamada, Y.
Miyata, S.
Yoshizumi, M.
Fukushima, H.
Ibi, A.
Izumi, T.
Shiohara, Y.
Kato, T.
Hirayama, T.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2009, 469 (15-20): : 1298 - 1302
[26] Development of coated conductors by PLD process for HTS power applications
Ohmatsu, Kazuya
Abiru, Kenji
Yamaguchi, Takashi
Shingai, Yuki
Konishi, Masaya
SEI Technical Review, 2011, (73): : 45 - 51
[27] IBAD-MgO technology for coated conductors
Jo, William
PROGRESS IN SUPERCONDUCTIVITY AND CRYOGENICS, 2016, 18 (03): : 1 - 5
[28] Development of long GdBCO coated conductor using the IBAD/MPMT-PLD method
Ibi, A.
Fukushima, H.
Yamada, Y.
Miyata, S.
Kuriki, R.
Takahashi, K.
Shiohara, Y.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2006, 19 (12): : 1229 - 1232
[29] Preparation of conduction-cooled HTS coils using Y-123 coated conductors by IBAD/PLD process
Fuji, H.
Hanyu, S.
Kakimoto, K.
Iijima, Y.
Saitoh, T.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2007, 463 : 751 - 754
[30] Progress in Scale-Up of RE-123 Coated Conductors With Ic of 300 A/cm by IBAD/PLD Process
Hanyu, Satoru
Tashita, C.
Hayashida, T.
Kutami, H.
Igarashi, M.
Hanada, Y.
Fuji, H.
Kakimoto, K.
Iijima, Y.
Saitoh, T.
Kato, T.
Hirayama, T.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2009, 19 (03) : 3240 - 3243

← 1 2 3 4 5 →