Determination and assessment of spontaneous combustion zone of coal at gobs of the fully-mechanized top-coal caving face

被引:0
|
作者
Xu Mangui [1 ]
Wen Hu [1 ]
Ge Linmei [1 ]
Norio, Okada [1 ]
机构
[1] Xian Univ Sci & Technol, Energy Engn Coll, Xian 710054, Shanxi, Peoples R China
关键词
coal spontaneous combustion; fully-mechanized top-coal caving face; dangerous zone; assessment; minimum loose coal thickness; limit oxygen concentration; maximum air leakage intensity;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Based on the heat output of coal and the rate of oxygen consumption tested by the big coal spontaneous combustion experimental unit, and through determining oxygen concentration distribution in a gob, the rule of distribution for air leak intensity in gob is deduced. In view ofthe conservation principle of energy and real distributions, such as coal thickness, air leak intensity, oxygen concentration, the terminal parameters resulting in coal self ignition are calculated, and the necessary conditions determining the dangerous zone of coal self ignition is established. According to the width of temperature-rising zone and the shortest period of coal self ignition, the least mining velocity resulting in coal self ignition can be calculated, and the sufficient conditions determining the dangerous zone of coal self ignition is established. The shortest period of coal self ignition is obtained under actual mining conditions in the dangerous zone, of coal self ignition in a gob.
引用
下载
收藏
页码:1604 / 1607
页数:4
相关论文
共 50 条
  • [31] Design of coal pillar with roadway driving along goaf in fully mechanized top-coal caving face
    Chang, Jucai
    Xie, Guangxiang
    Yang, Ke
    MINE SAFETY AND EFFICIENT EXPLOITATION FACING CHALLENGES OF THE 21ST CENTURY, 2010, : 235 - 241
  • [32] Neural Network Identification Model for Technology Selection of Fully-Mechanized Top-Coal Caving Mining
    孟宪锐
    徐永勇
    汪进
    International Journal of Mining Science and Technology, 2001, (02) : 106 - 110
  • [33] Bolting mechanism of roadway driving along next goaf in fully-mechanized top-coal caving face and engineering application
    Yang, YJ
    Chen, SJ
    Xu, L
    Liu, SJ
    Zhai, JY
    PROGRESS IN SAFETY SCIENCE AND TECHNOLOGY, VOL 4, PTS A and B, 2004, 4 : 1016 - 1019
  • [34] Study on reasonable mining and caving ratio in fully-mechanized top-coal caving mining of coal seam with large thickness variation coefficient
    Zhang M.
    Li F.
    Yang L.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (08): : 8 - 15
  • [35] Study on the Mechanism of a Hanging Roof at a Difficult Caving End in a Fully-Mechanized Top Coal Caving Face
    Liu, Hongtao
    Hao, Cheng
    Han, Zijun
    Liu, Qinyu
    Wang, Haozhu
    Liang, Jialu
    Zhang, Dandan
    SUSTAINABILITY, 2023, 15 (01)
  • [36] Three-dimensional numerical simulation of spontaneous combustion in goaf of fully mechanized top-coal caving longwall
    Cheng, Weimin
    Wang, Gang
    Zhang, Jiacai
    Sun, Lulu
    Wang, Gang
    Xie, Jun
    MINE SAFETY AND EFFICIENT EXPLOITATION FACING CHALLENGES OF THE 21ST CENTURY, 2010, : 91 - 97
  • [37] Numerical simulation on danger zone for spontaneous combustion in goaf at fully-mechanized caving face
    1922, CAFET INNOVA Technical Society, 1-2-18/103, Mohini Mansion, Gagan Mahal Road,, Domalguda, Hyderabad, 500029, India (09):
  • [38] Testing study on deformation features of surrounding rocks of gob-side entry retaining in fully-mechanized coal face with top-coal caving
    Zhang, Dongsheng
    Mao, Xianbiao
    Ma, Wending
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2002, 21 (03): : 331 - 334
  • [39] Analysis of rib spalling mechanism of fully-mechanized top-coal caving face with great mining height in extra-thick coal seam
    Chang Ju-cai
    Xie Guang-xiang
    Zhang Xue-hui
    ROCK AND SOIL MECHANICS, 2015, 36 (03) : 803 - 808
  • [40] Determination and prediction on "three zones" of coal spontaneous combustion in a gob of fully mechanized caving face
    Deng, Jun
    Lei, Changkui
    Xiao, Yang
    Cao, Kai
    Ma, Li
    Wang, Weifeng
    Bin Laiwang
    FUEL, 2018, 211 : 458 - 470