INFLUENCE OF Fe VAPOUR ON WELD POOL BEHAVIOR OF PLASMA ARC WELDING

被引:11
|
作者
Jian Xiaoxia [1 ,2 ]
Wu Chuansong [1 ]
机构
[1] Shandong Univ, Minist Educ, Key Lab Liquid Solid Struct Evolut & Mat Proc, Jinan 250061, Peoples R China
[2] Henan Univ Technol, Sch Mech & Elect Engn, Zhengzhou 450001, Peoples R China
基金
中国国家自然科学基金;
关键词
plasma arc welding; Fe vapor; weld pool; keyhole; plasma arc; numerical simulation; DIFFUSION;
D O I
10.11900/0412.1961.2016.00008
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Plasma arc welding (PAW) is an important joining technology for plates with medium thickness because of the heat source characteristics, however, most models of PAW neglect the vaporization of metal. An axi-symmetrical unified PAW model was developed by taking into account the influence of Fe vapor behavior from the molten pool surface as an anode in this work. The simulation region includes tungsten cathode, plasma arc, weld pool, keyhole and their self-consistence coupling using one set conservation equations. A viscosity approximation is used to express the diffusion coefficient in terms of the viscosities of iron vapor. The main physical properties of Ar plasma are set as function of temperature and mass fraction of Fe vapor and are updated every iterate step to reflect the influence of Fe vapor in real time. The process of keyhole formation in stationary plasma arc welding is simulated under welding currents of 150, 170 and 190 A. The transient production, diffusion and concentration in the plasma arc of Fe vapor were presented. The effects of Fe vapor on the plasma arc behavior and formation of weld pool and keyhole are studied. It was shown that the evaporation rate of Fe was greatly dependent on the temperature of the weld pool. Most Fe evaporates from the top part of the keyhole surface and little from the keyhole bottom. The diffusion of Fe vapor is accelerated in the radial direction and is prevented in the axial direction due to the effect of plasma jets flow and at last it tends to be confined to the fringe of the plasma arc closed to the anode. The mixing of Fe vapor in the plasma results in the increase of radiation losses and the decrease of current density of the arc plasma in the fringe, but it had insignificant influence on the arc center. The heat flux from the plasma arc to the anode is also affected by Fe vapor due to its influence on the plasma arc properties. It is found that the calculation result of the width of the molten pool becomes more accurate to consider the effect of Fe vapor.
引用
收藏
页码:1467 / 1476
页数:10
相关论文
共 26 条
  • [1] [Anonymous], INT J HEAT MASS TRAN
  • [2] Transport properties in non-equilibrium argon, copper and argon-copper thermal
    Aubreton, A
    Elchinger, MF
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2003, 36 (15) : 1798 - 1805
  • [3] Thermal plasma properties for Ar-Cu, Ar-Fe and Ar-Al mixtures used in welding plasmas processes: II. Transport coefficients at atmospheric pressure
    Cressault, Y.
    Murphy, A. B.
    Teulet, Ph
    Gleizes, A.
    Schnick, M.
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2013, 46 (41)
  • [4] Daha MA., 2012, Int J Eng Sci Technol, V4, P506
  • [5] The dynamic effects of metal vapour in gas metal arc welding
    Haidar, Jawad
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2010, 43 (16)
  • [6] VOLUME OF FLUID (VOF) METHOD FOR THE DYNAMICS OF FREE BOUNDARIES
    HIRT, CW
    NICHOLS, BD
    [J]. JOURNAL OF COMPUTATIONAL PHYSICS, 1981, 39 (01) : 201 - 225
  • [7] Modelling of metal vapour in pulsed TIG including influence of self-absorption
    Iwao, Toru
    Mori, Yusuke
    Okubo, Masato
    Sakai, Tadashi
    Tashiro, Shinichi
    Tanaka, Manabu
    Yumoto, Motoshige
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2010, 43 (43)
  • [8] A unified 3D model for an interaction mechanism of the plasma arc, weld pool and keyhole in plasma arc welding
    Jian, Xiaoxia
    Wu, ChuanSong
    Zhang, Guokai
    Chen, Ji
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2015, 48 (46)
  • [9] Numerical simulation of plasma arc welding with keyhole-dependent heat source and arc pressure distribution
    Li, T. Q.
    Wu, C. S.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (1-4): : 593 - 602
  • [10] A DYNAMIC HEAT SOURCE MODEL WITH RESPECT TO KEYHOLE EVOLUTION IN PLASMA ARC WELDING
    Li Yan
    Feng Yanhui
    Zhang Xinxin
    Wu Chuansong
    [J]. ACTA METALLURGICA SINICA, 2013, 49 (07) : 804 - 810