Effects of cerium and manganese on corrosion of Fe-Cr and Fe-Cr-Ni alloys in Ar-20CO2 gas at 818°C

被引:66
|
作者
Thuan Dinh Nguyen [1 ]
Zhang, Jianqiang [1 ]
Young, David J. [1 ]
机构
[1] Univ New S Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia
基金
澳大利亚研究理事会;
关键词
Alloy; Cerium; Manganese; High temperature corrosion; DIFFUSION-COEFFICIENT; INTERNAL OXIDATION; CARBURIZATION; CARBON; OXYGEN; OXIDE; IRON; AL; SI;
D O I
10.1016/j.corsci.2013.06.046
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Model alloys Fe-9Cr, Fe-20Cr and Fe-20Cr-20Ni (wt.%) with Ce (0.05%, 0.1%) or Mn (1%, 2%) were exposed to Ar-200O(2) gas at 818 degrees C. Scales on Fe-9Cr alloys consisted of FeO and FeCr2O4, Fe-20Cr-(Ce) alloys formed only Cr2O3, and Fe-20Cr-(Mn) alloys formed Cr2O3 and MnCr2O4. All Fe-20Cr-20Ni alloys formed Fe3O4, FeCr2O4 and FeNi3. Cerium additions had little effects, but additions of 2% Mn significantly improved oxidation resistance of Fe-20Cr and Fe-20Cr-20Ni alloys. Most alloys also carburized. All alloys developed protective chromium-rich oxide scales in air. Different behavior in the two gases is attributed to faster Cr2O3 scaling rates induced by CO2. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:231 / 242
页数:12
相关论文
共 50 条
  • [21] EFFECT OF MANGANESE ON THE STABILITY OF AUSTENITE IN FE-CR-NI ALLOYS
    RAGHAVAN, V
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (02): : 237 - 242
  • [22] NITROGEN SOLUBILITY AND ALUMINUM NITRIDE PRECIPITATION IN LIQUID-IRON, FE-CR, FE-CR-NI, AND FE-CR-NI-MO ALLOYS
    WADA, H
    PEHLKE, RD
    METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1978, 9 (03): : 441 - 448
  • [23] Detection of sensitization and intergranular corrosion of Fe-Cr-Ni alloys
    Kain, V
    Prasad, RC
    De, PK
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 1997, 16 (03) : 183 - 199
  • [24] Artificial Intelligence Approach to Predict Elevated Temperature Cyclic Oxidation of Fe-Cr and Fe-Cr-Ni Alloys
    Anirudh, M. K.
    Iyengar, M. Sreenidhi
    Desik, P. H. Anantha
    Phaniraj, M. P.
    OXIDATION OF METALS, 2022, 98 (3-4): : 291 - 303
  • [25] Effects of Silicon and Water Vapour on Corrosion of Fe–20Cr and Fe–20Cr–20Ni Alloys in CO2 at 650 °C
    Thuan Dinh Nguyen
    Jianqiang Zhang
    David J. Young
    Oxidation of Metals, 2017, 87 : 541 - 573
  • [26] Numerical analysis on Si deoxidation of molten Fe, Ni, Fe-Ni, Fe-Cr, Fe-Cr-Ni, Ni-Cu and Ni-Co alloys by quadratic formalism
    Miki, T
    Hino, M
    ISIJ INTERNATIONAL, 2005, 45 (12) : 1848 - 1855
  • [27] Effects of Cr and Ni on interdiffusion and reaction between U and Fe-Cr-Ni alloys
    Huang, K.
    Park, Y.
    Zhou, L.
    Coffey, K. R.
    Sohn, Y. H.
    Sencer, B. H.
    Kennedy, J. R.
    JOURNAL OF NUCLEAR MATERIALS, 2014, 451 (1-3) : 372 - 378
  • [28] Thermodynamics of aluminum and manganese deoxidation equilibria in Fe-Ni and Fe-Cr alloys
    Ohta, H
    Suito, H
    ISIJ INTERNATIONAL, 2003, 43 (09) : 1301 - 1308
  • [29] Effect of Fe on corrosion of Ni-20Cr and Ni-30Cr alloys in wet CO2 gas at 650 and 700 °C
    Xie, Yun
    Zhang, Jianqiang
    Young, David J.
    Zheng, Weisen
    CORROSION SCIENCE, 2019, 154 : 129 - 143
  • [30] CAUSTIC STRESS-CORROSION OF FE-CR-NI AUSTENITIC ALLOYS
    BERGE, P
    DONATI, JR
    PRIEUX, B
    VILLARD, D
    CORROSION, 1977, 33 (12) : 425 - 435