The effect of addition Mn on the morphology of Fe-rich phase in the Al-1Fe alloy

被引：1
|
作者：
Yu, Guojun [1 ]
Peng, Jihua [1 ]
机构：
[1] S China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Peoples R China
来源：
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3 | 2013年 / 602-604卷
关键词：
aluminium alloy; manganese; microstructure; Fe-rich phases; IRON; ALUMINUM;
D O I：
10.4028/www.scientific.net/AMR.602-604.590
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A flux with MnCl2 is used to control the morphology of microstructure in Al-1Fe alloys. An orthogonal test plan (L(3(3))) was employed to study the effect of the ratio of Mn/Fe, temperature and holding time on the morphology of the Fe-rich phase. Metallographic and image analys is techniques have been used to quantitatively examine the microstructural changes occurring with Mn addition. XRD analysis is employed to identify the phase of intermetallic compound in the alloy. It is found that when the ratio of Mn/Fe in the melt is located in the range from 1.5 to 2.0, the original needle like iorn phase can be transformed to be massive morphology, such as Chinese script, globule or polyhedral, and the area fraction of iron phase in the Al-1Fe alloy can be reduced by adding MnCl2 during the melt processing.
引用
收藏
页码：590 / 593
页数：4
相关论文
共 50 条
  • [21] PHASE-DIAGRAMS CALCULATED FOR FE-RICH FE-SI-CO AND FE-SI-AL ORDERING ALLOY SYSTEMS
    FUKAYA, M
    MIYAZAKI, T
    KOZAKAI, T
    JOURNAL OF MATERIALS SCIENCE, 1991, 26 (20) : 5420 - 5426
  • [22] Fe-rich border and activation energy of phase decomposition in a Fe-Cr alloy
    Dubiel, S. M.
    Zukrowski, J.
    MATERIALS CHEMISTRY AND PHYSICS, 2013, 141 (01) : 18 - 21
  • [23] Evolution of Fe-Rich Intermetallics in Al-Si-Cu 319 Cast Alloy with Various Fe, Mo, and Mn Contents
    Lanfeng Jin
    Kun Liu
    X. Grant Chen
    Metallurgical and Materials Transactions B, 2019, 50 : 1896 - 1907
  • [24] Evolution of Fe-Rich Intermetallics in Al-Si-Cu 319 Cast Alloy with Various Fe, Mo, and Mn Contents
    Jin, Lanfeng
    Liu, Kun
    Chen, X. Grant
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, 50 (04): : 1896 - 1907
  • [25] Effect of B4C nanoparticles addition on the refinement of Fe-rich phase in ZL108 alloy
    Wang, Wenhao
    Xu, RongFu
    Xiang, Lixin
    Han, Yuxiu
    Li, Enfa
    Zhang, Shuhao
    Zheng, Hongliang
    MATERIALS & DESIGN, 2024, 247
  • [26] Evolution behavior of Fe and Fe-rich phases in high-Fe concentration Al-Si-Mg alloy with Mn, Cr, and Co alloyed
    Huang, Yuanchun
    Li, Li
    Wen, Jinchuan
    Liu, Yu
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [27] Effect of Fe Content on the Soft Magnetic Properties of Fe-Rich FeSiBC Amorphous Alloy
    Gao, Ke
    Fu, Peixin
    Huang, Yuexian
    Zhu, Weixian
    Yang, Yuanzheng
    PHYSICS OF THE SOLID STATE, 2024, 66 (10) : 424 - 430
  • [28] Influence of addition of Cr on morphology of the primary Al3Fe phase in Al-5%Fe alloy
    School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110023, China
    Cailiao Gongcheng, 2006, SUPPL. (20-23):
  • [29] Morphological Evolution of Fe-Rich Phases in the AlSi9Cu3Mg0.19(Fe)Alloy with the Addition of Minor Mn and Cr
    Zhi-Qiang Qiu
    Xiang-Chen Meng
    Qiu-Hong Yuan
    Xiao-Shu Zeng
    Xi-Xin Rao
    Yan Ding
    Lan Luo
    Yong Liu
    ActaMetallurgicaSinica(EnglishLetters), 2018, 31 (06) : 629 - 640
  • [30] Transformation of Fe-rich intermetallic phases and eutectic Si morphology in Al-Si-Cu-Fe cast alloy with solution treatment
    Jiang, Bo
    Ji, Ze-Sheng
    Xu, Hong-Yu
    Hu, Mao-Liang
    Zhang, Yong-Bing
    Wang, Shao-Zhu
    MATERIALS RESEARCH EXPRESS, 2019, 6 (06):
12345