An Investigation into Mechanical Properties of Ductile Cast Iron with Different Heat Treatment Processes

被引：2

作者：

Moussa, Romany R. ^{[1
,2
]}

Ali, Amer E. ^{[3
]}

Abdel-Magied, Ragab K. ^{[3
]}

Elshiekh, Mohamed N. ^{[1
]}

机构：

[1] Beni Suef Univ, Fac Ind Educ, Dept Prod Technol, Salah Salem St, Bani Suwayf 62511, Egypt

[2] Budapest Univ Technol & Econ, Fac Mech Engn, Dept Mat Sci & Engn, POB 91, H-1521 Budapest, Hungary

[3] Beni Suef Univ, Fac Engn, Dept Mech Engn, Salah Salem St, Bani Suwayf 62511, Egypt

来源：

PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING | 2019年 / 63卷 / 03期

关键词：

heat treatment; DCI (Ductile Cast Iron); quenching; tempering; austempering;

D O I：

10.3311/PPme.13672

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The mechanical properties as well as microstructure of the ductile cast iron (DCI) are most likely affected by heat treatments. In this work, the mechanical properties of different heat treated of DCI alloy were investigated. Two heat treatment (HT) processes were conducted for DCI; austempering and quenching followed by lower tempering. The melted alloy of DCI was poured in Y-block, from which the specimens of the mechanical tests were prepared. Experimental tests were carried out to investigate the effect of these HT processes on the mechanical properties. A comparison between mechanical properties due to HT and as cast DCI are presented and discussed. The results showed that there is a difference in microstructure, homogeneity, wear rate and compression of DCI based on the conducted heat treatment.

引用

页码：183 / 187

页数：5

共 50 条

[1] Influence of Pre-heat Treatment on Mechanical Properties of Austempered Ductile Cast Iron
Nawrocki, P.
Wasiluk, K.
Lukasik, K.
Myszka, D.
ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (01) : 176 - 180
[2] Comparing the Structure and Mechanical Properties of Welds on Ductile Cast Iron (700 MPa) under Different Heat Treatment Conditions
Gouveia, Ronny M.
Silva, Francisco J. G.
Paiva, Olga C.
Andrade, Maria de Fatima
Pereira, Lucas Augusto
Moselli, Paulo Cezar
Papis, Konrad J. M.
METALS, 2018, 8 (01):
[3] The Effects of Austempering Heat Treatment on the Mechanical Properties of Heavy Vehicles Camshaft made of Different Analysis Ductile Cast Iron
Karaca, B.
Simsir, M.
ACTA PHYSICA POLONICA A, 2019, 135 (04) : 804 - 810
[4] Microstructures and Mechanical Properties of Ductile Cast Iron with Different Crystallizer Inner Diameters
Bai, Jiaojiao
Xu, Haifeng
Wang, Yuhui
Chen, Xingpin
Zhang, Xiaodan
Cao, Wenquan
Xu, Yang
CRYSTALS, 2022, 12 (03)
[5] Influence of heat treatment on mechanical properties of austempered ductile iron
Ahmed, F.S.
Modelling, Measurement & Control C: Energetics, Chemistry, Earth,Environmental & Biomedical Problems, 1994, 40 (04): : 49 - 63
[6] Effect of Subzero Treatment on the Microstructure and Mechanical Properties of Austempered Ductile Cast Iron
Kang, Chang-Yong
Lee, Kwang-Hee
Jung, Hae Ryong
Kim, Gwang-Ho
Kim, Byoung-Suhk
Kim, Ick-Soo
MATERIALS TRANSACTIONS, 2009, 50 (09) : 2207 - 2211
[7] The effect of boro-tempering heat treatment on the properties of ductile cast iron
Yalcin, Y.
Yazici, A. M.
KOVOVE MATERIALY-METALLIC MATERIALS, 2007, 45 (01): : 51 - 57
[8] The Effect of Heat Treatment on the Structure and Properties of VCh 35 Ductile Cast Iron
Ivanov, S. G.
Guryev, A. M.
Guryev, M. A.
Mal'kov, N. V.
Astakhov, D. A.
Romanenko, V. V.
Chernykh, E. V.
TECHNICAL PHYSICS LETTERS, 2023, 49 (8) : 92 - 96
[9] Investigation into mechanical properties of austempered ductile cast iron (ADI) in accordance with austempering temperature
Kim, Yoon-Jun
Shin, Hocheol
Park, Hyounsoo
Lim, Jong Dae
MATERIALS LETTERS, 2008, 62 (03) : 357 - 360
[10] Improving the Mechanical Strength of Ductile Cast Iron Welded Joints Using Different Heat Treatments
Marques, Eva S. V.
Silva, F. J. G.
Paiva, Olga C.
Pereira, Antonio B.
MATERIALS, 2019, 12 (14)

← 1 2 3 4 5 →