Effect of water absorption on the mechanical properties of n-SiC filled recycled cellulose fibre reinforced epoxy eco-nanocomposites

被引:62
|
作者
Alamri, H. [1 ]
Low, I. M. [1 ]
机构
[1] Curtin Univ, Dept Imaging & Appl Phys, Perth, WA 6845, Australia
关键词
Recycled cellulose fibre; Silicon carbide; Mechanical properties; Epoxy matrix; Eco-nanocomposites; Water absorption; NATURAL FIBERS; POLYMER MATRIX; COMPOSITES; BEHAVIOR;
D O I
10.1016/j.polymertesting.2012.06.001
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The effect of the addition of n-SiC particles on water absorption of n-SiC reinforced RCF/epoxy eco-nanocomposites was studied. Results indicated that water uptake decreased as n-SiC content increased. This was also shown by FTIR observation. The effect of water absorption on the mechanical properties of n-SiC filled RCF/epoxy eco-nanocomposites was investigated as a function of n-SiC content. Due to water absorption, flexural strength, flexural modulus and fracture toughness of n-SiC filled RCF/epoxy eco-nanocomposites significantly decreased compared to dry composites. The effect of n-SiC on these mechanical properties was found to be positive. Flexural strength, flexural modulus and fracture toughness increased by 14.4, 7.5 and 6.1%, respectively, compared to unfilled RCF/epoxy composites after the addition of 5 wt% n-SiC. SEM results showed clean pull out of cellulose fibres as a result of degradation in fibre-matrix interfacial bonding by water absorption. The addition of n-SiC was found to enhance the interfacial adhesion between fibre and matrix. Crown Copyright (C) 2012 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:810 / 818
页数:9
相关论文
共 50 条
  • [31] Water Absorption Behaviour and Its Effect on the Mechanical Properties of Flax Fibre Reinforced Bioepoxy Composites
    Munoz, E.
    Garcia-Manrique, J. A.
    INTERNATIONAL JOURNAL OF POLYMER SCIENCE, 2015, 2015
  • [32] An experimental investigation on mechanical properties of SiC particle and sisal fibre reinforced epoxy matrix composites
    Kamaraj, M.
    Santhanakrishnan, R.
    Muthu, E.
    2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018), 2018, 402
  • [33] Mechanical Properties of Recycled PP Reinforced with Microcrystalline Cellulose: Effect of MAPP Content
    Samat, N.
    Zulkifli, N. I.
    Anuar, H.
    9TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY: 2020 - SCIENTIFIC AND INDUSTRIAL CHALLENGES, 2013, : 451 - 456
  • [34] Effect of Fibre Orientation on Mechanical Properties of Hardwika Binata and Bamboo Fibre Reinforced Epoxy Composites
    Rao, H. Raghavendra
    Reddy, K. Madhava
    Reddy, P. Venkateshwar
    Reddy, R. Meenakshi
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 1265 - 1269
  • [35] Thermal, mechanical, and morphological properties of oil palm cellulose nanofibril reinforced green epoxy nanocomposites
    Yusuf, J.
    Sapuan, S. M.
    Rashid, Umer
    Ilyas, R. A.
    Hassan, M. R.
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2024, 278
  • [37] The Effect of Fibre Content on Mechanical Properties, Water Absorption and Morphology of Corn Husk Fibre Reinforced HDPE/POE Biocomposites
    Mohamed, Wan Zarina Wan
    Zulkifli, Muhamad Ezlan
    Daud, Tuan Azmar Tuan
    Taib, Rahmad Mohd
    Abd Latif, Shahida
    Baharum, Azizah
    Zakari, Nurzam Ezdiani
    NANO HYBRIDS AND COMPOSITES, 2024, 42 : 51 - 58
  • [38] Study on Mechanical Properties and Water Absorption Behaviour of Wastepaper Fibre/Recycled Polypropylene Composites
    Zhang Xiaolin
    Bo Xiangfeng
    Wang Rumin
    POLYMERS & POLYMER COMPOSITES, 2013, 21 (06): : 395 - 401
  • [39] Effect of reinforcements on mechanical and thermal properties of SiC short-fibre-reinforced SiC composites
    Lee, JS
    Yano, T
    ADVANCED COMPOSITES LETTERS, 2004, 13 (04) : 193 - 198
  • [40] The effect of thermal spiking and resultant enhanced moisture absorption on the mechanical and viscoelastic properties of carbon fibre reinforced epoxy laminates
    Hough, JA
    Xiang, ZD
    Jones, FR
    EXPERIMENTAL TECHNIQUES AND DESIGN IN COMPOSITE MATERIALS 3, 1998, 144 : 27 - 41