High-optical-efficiency integral imaging display based on gradient-aperture pinhole array

An integral imaging (II) display is proposed which consists of a display panel and a gradient-aperture pinhole array. The gradient-aperture pinhole array is symmetrical in both horizontal and vertical directions. The leftmost and rightmost pinholes are used to fix the horizontal viewing angle, and the uppermost and nethermost pinholes are used to fix the vertical viewing angle. To increase the optical efficiency, the aperture widths of other pinholes are gradually increased from both sides to the middle in the horizontal and vertical directions, respectively. A prototype of the proposed II display is developed. Its horizontal viewing angle is equal to that of the conventional one, while its optical efficiency is higher than that of the conventional one. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.