Combination of extrusion and artificial aging to strengthen AZ80 magnesium alloy

被引：0
|
作者：
Yin, De Liang [1 ]
Chen, Xin [1 ]
机构：
[1] Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nanjing 210094, Jiangsu, Peoples R China
来源：
ADVANCED MATERIALS AND STRUCTURES, PTS 1 AND 2 | 2011年 / 335-336卷
关键词：
magnesium alloy; extrusion; artificial aging; toughness; DUCTILITY;
D O I：
10.4028/www.scientific.net/AMR.335-336.818
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Conventional extrusion and artificial aging were combined to investigate the possibility of superposing precipitation strengthening on texture strengthening. Uniaxial tension test was used to characterize the mechanical properties and the static toughness values were calculated. Metallographic microscope and TEM were employed to observe the microstructures after extrusion and artificial aging. It is shown that remarkable discontinuous precipitation occurs after artificial aging at 150 degrees C. Although static toughness was slightly reduced, the yield strength was obviously increased and therefore good strengthening and toughening effect was achieved.
引用
收藏
页码：818 / 821
页数：4
相关论文
共 50 条
  • [41] Influence of ageing on impact toughness of AZ80 magnesium alloy
    Zhang, Xing
    Zhang, Zhi-Min
    Li, Bao-Cheng
    Jinshu Rechuli/Heat Treatment of Metals, 2007, 32 (10): : 69 - 70
  • [42] Corrosion of artificial aged magnesium alloy AZ80 in 3.5 wt pct NaCl solutions
    Zeng, Rongchang
    Han, Enhou
    Ke, Wei
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2007, 23 (03) : 353 - 358
  • [43] Corrosion of artificial aged magnesium alloy AZ80 in 3.5 wt pct NaCl solutions
    Environmental Corrosion Center, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
    不详
    J Mater Sci Technol, 2007, 3 (353-358):
  • [44] Investigating the Microstructure, Hardness and Tensile Behavior of Magnesium AZ80 Alloy and AZ80/SiC Nanocomposite Manufactured Through Dual Equal Channel Lateral Extrusion (DECLE)
    M. A. Salevati
    A. Imam
    R. Seifi
    F. Akbaripanah
    Metals and Materials International, 2021, 27 : 3538 - 3549
  • [45] Corrosion of Artificial Aged Magnesium Alloy AZ80 in 3.5 wt pct NaCl Solutions
    Rongchang ZENG
    JournalofMaterialsScience&Technology, 2007, (03) : 353 - 358
  • [46] Investigating the Microstructure, Hardness and Tensile Behavior of Magnesium AZ80 Alloy and AZ80/SiC Nanocomposite Manufactured Through Dual Equal Channel Lateral Extrusion (DECLE)
    Salevati, M. A.
    Imam, A.
    Seifi, R.
    Akbaripanah, F.
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (09) : 3538 - 3549
  • [47] Aging behavior of ECAP processed AZ80 Mg alloy
    Ogushi, Yoshifumi
    Mostaed, Ehsan
    Dellasega, David
    Vedani, Maurizio
    Miyamoto, Hiroyuki
    Fujiwara, Hiroshi
    6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6), 2014, 63
  • [48] Effect of different cyclic expansion-extrusion processes on microstructure and mechanical properties of AZ80 magnesium alloy
    Xue, Yong
    Yang, Zhihui
    Bai, Bing
    Zhang, Zhimin
    Du, Yue
    Ren, Luying
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (04) : 1 - 8
  • [49] Effect of laser shock peening and aging treatment on deformation twins and precipitates of AZ80 magnesium alloy
    Zhang Q.
    Zheng X.
    Shao W.
    Zhang B.
    Han W.
    Liu H.
    1600, Science Press (43):
  • [50] Precipitation behavior, texture and mechanical properties of AZ80 magnesium alloy produced by equal channel angular extrusion
    Li, Xiao
    Yang, Ping
    Li, Jizhong
    Ding, Hua
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2010, 24 (01): : 1 - 9
12345