Thermoelectric generator for electricity from the exhaust manifold of the diesel engine

被引：0
|
作者：
Albana, Muhammad Hasan [1 ]
Ibrahim [1 ]
Saputra, Ihsan [1 ]
Baharudin, Budi [1 ]
Nugroho, Cahyo Budi [1 ]
机构：
[1] Politekn Negeri Batam, Dept Mech Engn, Batam, Indonesia
来源：
PROCEEDINGS OF THE 2018 INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING (ICAE) | 2018年
关键词：
thermoelectric generator; exhaust manifold; electricity; WASTE HEAT-RECOVERY;
D O I：
暂无
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
This research objective is to convert heat from the exhaust manifold of the diesel engine to electrical energy by using the thermoelectric generator (TEG). TEG consist of six semiconductors and be equipped with the heat sink. Research shows that exhaust manifold heat can be used to generate electrical energy by using TEG although the electricity produced is very small. The maximum electrical voltage generated from the use of TEG is 1,84 volts. The maximum electrical current generated by TEG is 51,6 mA. The maximum electrical power generated by TEG is 94,7 mW. TEG efficiency in this study was 3.2% to 4%. The voltage and the electric current generated by the TEG will be higher if the temperature difference between the hot side and the cold side of the semiconductor is higher.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] Effect of Water Injection into Exhaust Manifold on Diesel Engine Combustion and Emissions
    Nour, M.
    Kosaka, H.
    Abdel-Rahman, Ali K.
    Bady, M.
    3RD INTERNATIONAL CONFERENCE ON POWER AND ENERGY SYSTEMS ENGINEERING, CPESE 2016, 2016, 100 : 178 - 187
  • [22] Variable geometry exhaust manifold turbocharging system for vehicle diesel engine
    Wang, Shaoming
    Deng, Kangyao
    Cui, Yi
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2011, 57 (01) : 37 - 49
  • [23] Vibration analysis of composite exhaust manifold for diesel engine using CFD
    Kumar, R. Ramesh
    Razak, Abdul
    Alshahrani, Saad
    Sharma, Abhishek
    Thakur, Deepak
    Shaik, Saboor
    Saleel, C. Ahamed
    Afzal, Asif
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 32
  • [24] LOCATION ISOLABILITY OF INTAKE AND EXHAUST MANIFOLD LEAKS IN A TURBOCHARGED DIESEL ENGINE WITH EXHAUST GAS RECIRCULATION
    Hand, Michael J., III
    Stefanopoulou, Anna
    7TH ANNUAL DYNAMIC SYSTEMS AND CONTROL CONFERENCE, 2014, VOL 3, 2014,
  • [25] Effect of the use of a thermoelectric generator on the pumping work of a diesel engine
    Ezzitouni, Samir
    Fernandez-Yanez, Pablo
    Sanchez, Luis
    Armas, Octavio
    Soto, Felipe
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2021, 22 (03) : 1016 - 1027
  • [26] A Study on Generating Electricity by Using Exhaust Waste Heat in a Diesel Engine
    Aydogan, Hasan
    Ozcelik, A. Engin
    Acaroglu, Mustafa
    Isik, Hakan
    ADVANCED RESEARCH IN MATERIAL SCIENCE AND MECHANICAL ENGINEERING, PTS 1 AND 2, 2014, 446-447 : 858 - +
  • [27] Effects of an Exhaust System Equipped with a Thermoelectric Generator on Combustion, Performance, Emissions, and Energy Recovery in a Diesel Engine Using Biodiesel
    Karabulut, Murat
    Sayin, Cenk
    Erdogan, Sinan
    ENERGIES, 2024, 17 (05)
  • [28] AN EXHAUST MANIFOLD PRESSURE ESTIMATOR FOR A TWO-STAGE TURBOCHARGED DIESEL ENGINE
    Chiara, Fabio
    Canova, Marcello
    Wang, Yue-Yun
    2011 AMERICAN CONTROL CONFERENCE, 2011,
  • [29] Casting process of exhaust manifold of Cummins 6BT diesel engine
    Yuan, Zheng-Feng
    Zhuzao/Foundry, 2002, 51 (10):
  • [30] Influences of the dead end on the flow characteristics at the exhaust manifold of a marine diesel engine
    Benek, Gorkem
    Ozsoysal, Osman Azmi
    JOURNAL OF THERMAL ENGINEERING, 2021, 7 (06): : 1519 - 1530
12345