Thermoelectric generator for electricity from the exhaust manifold of the diesel engine

被引:0
|
作者
Albana, Muhammad Hasan [1 ]
Ibrahim [1 ]
Saputra, Ihsan [1 ]
Baharudin, Budi [1 ]
Nugroho, Cahyo Budi [1 ]
机构
[1] Politekn Negeri Batam, Dept Mech Engn, Batam, Indonesia
关键词
thermoelectric generator; exhaust manifold; electricity; WASTE HEAT-RECOVERY;
D O I
暂无
中图分类号
TP39 [计算机的应用];
学科分类号
081203 ; 0835 ;
摘要
This research objective is to convert heat from the exhaust manifold of the diesel engine to electrical energy by using the thermoelectric generator (TEG). TEG consist of six semiconductors and be equipped with the heat sink. Research shows that exhaust manifold heat can be used to generate electrical energy by using TEG although the electricity produced is very small. The maximum electrical voltage generated from the use of TEG is 1,84 volts. The maximum electrical current generated by TEG is 51,6 mA. The maximum electrical power generated by TEG is 94,7 mW. TEG efficiency in this study was 3.2% to 4%. The voltage and the electric current generated by the TEG will be higher if the temperature difference between the hot side and the cold side of the semiconductor is higher.
引用
收藏
页数:4
相关论文
共 50 条
  • [1] Engine exhaust manifold with thermoelectric generator unit
    Royale, Andrew
    Simic, Milan
    Lappas, Petros
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2021, 22 (07) : 2180 - 2188
  • [2] The study of a thermoelectric generator with various thermal conditions of exhaust gas from a diesel engine
    In, Byung Deok
    Kim, Hyung Ik
    Son, Jung Wook
    Lee, Ki Hyung
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 86 : 667 - 680
  • [3] Analysis of a Diesel Engine Exhaust Manifold
    Yang, Yiran
    He, Miao
    Mojtahed, Masoud
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 9, 2015,
  • [4] Failure Analysis of a Diesel Engine Exhaust Manifold
    Yuan Li
    Jinxiang Liu
    Weiqing Huang
    Yuanhao Wu
    International Journal of Metalcasting, 2023, 17 : 538 - 550
  • [5] WELDMENT ANALYSIS OF A DIESEL ENGINE EXHAUST MANIFOLD
    Mojtahed, Masoud
    Le, Nganh
    DeSoto, Jerry Wayne
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 9, 2017,
  • [6] Failure Analysis of a Diesel Engine Exhaust Manifold
    Li, Yuan
    Liu, Jinxiang
    Huang, Weiqing
    Wu, Yuanhao
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) : 538 - 550
  • [7] COUPLED SIMULATION OF A THERMOELECTRIC GENERATOR APPLIED IN DIESEL ENGINE EXHAUST WASTE HEAT RECOVERY
    Xiao, Guo-Quan
    Zhang, Zheng
    THERMAL SCIENCE, 2020, 24 (01): : 281 - 292
  • [8] A THERMOELECTRIC GENERATOR POWERED BY ENGINE EXHAUST HEAT
    EMBRY, BL
    TUDOR, JR
    IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, 1968, AES4 (05) : 818 - &
  • [9] A THERMOELECTRIC GENERATOR POWERED BY ENGINE EXHAUST HEAT
    EMBRY, BL
    TUDOR, JR
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 1968, ED15 (10) : 814 - &
  • [10] Estimating exhaust manifold pressure in a turbocharged diesel engine
    Fredriksson, J
    Egardt, B
    PROCEEDINGS OF THE 2002 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, VOLS 1 & 2, 2002, : 701 - 706