Influences of Processing Parameters on Dilution Ratio of Laser Cladding Layer during Laser Metal Deposition Shaping

被引：19
|
作者：
Zhang, Kai [1 ]
Zhang, Xinmin [1 ]
Lu, Weijun [2 ]
机构：
[1] Shenyang Univ Technol, Sch Mech Engn, Shenyang 110870, Peoples R China
[2] Chinese Acad Sci, Shenyang Inst Automat, Shenyang 110016, Peoples R China
来源：
CHEMICAL ENGINEERING AND MATERIAL PROPERTIES II | 2012年 / 549卷
关键词：
Laser Metal Deposition Shaping (LMDS); Laser cladding; Stainless steel 316; Processing parameters; Dilution ratio;
D O I：
10.4028/www.scientific.net/AMR.549.785
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Laser Metal Deposition Shaping (LMDS) is a state-of-the-art technology that combines rapid prototyping and laser processing. There are many factors affecting the quality, precision, microstructure and performance of LMDS-deposited parts. Among them, dilution ratio is a significant one since it is not only an important index to judge the laser cladding quality, but directly affects the interlayer bonding strength and performance quality of as-formed metal parts. Thus, the substantial LMDS experiments were performed to conclude the influence of processing parameters on dilution ratio of laser cladding layer. The results indicate that the influence degree of scanning speed is most significant, while that of laser power is relatively slight. In order to ensure the perfect forming quality and strong metallurgical bonding, it is necessary to choose suitable dilution ratio to accomplish the LMDS process.
引用
收藏
页码：785 / +
页数：2
相关论文
共 50 条
  • [21] Laser strip cladding for large area metal deposition
    Tuominen, Jari
    Kaubisch, Marc
    Thieme, Sebastian
    Nakki, Jonne
    Nowotny, Steffen
    Vuoristo, Petri
    ADDITIVE MANUFACTURING, 2019, 27 : 208 - 216
  • [22] The Effect of Parameters of Laser Processing on the Morphology of Glaze Cladding
    Fan, Jiwei
    Jiao, Zhiqiang
    Li, Xiaopeng
    Zhao, Huijun
    Zhang, Zhenguo
    Zhang, Zhaojun
    Zhang, Ruijie
    Liu, Ying
    Zhang, Xiaoli
    ADVANCED MATERIALS AND INFORMATION TECHNOLOGY PROCESSING II, 2012, 586 : 265 - 268
  • [23] The influences of processing parameters on forming characterizations during laser rapid forming
    Li, YM
    Yang, H
    Lin, X
    Huang, WD
    Li, JG
    Zhou, YH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 360 (1-2): : 18 - 25
  • [24] The effect of laser process parameters on microstructure and dilution rate of cladding coatings
    Liu Bin
    Liu Heping
    Jing Xingbin
    Li Yuxin
    Bai Peikang
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS, 2018, 307
  • [25] Effects of scanning methods on thermal stress during laser metal deposition shaping
    Shenyang Institute of Automation, Chinese Academy Sciences, Shenyang 110016, China
    不详
    Jixie Gongcheng Xuebao, 2007, 11 (74-81):
  • [26] Effects of substrate preheating on thermal stress during laser metal deposition shaping
    Long, Risheng
    Liu, Weijun
    Xing, Fei
    Wang, Huabing
    Bian, Hongyou
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2009, 45 (10): : 241 - 247
  • [27] Effects of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding
    Lee, Hyoung-Keun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 202 (1-3) : 321 - 327
  • [28] Deposition parameters influences in pulsed laser deposition by plume reflection
    Marcu, A
    Grigoriu, C
    Jiang, W
    Yatsui, K
    ADVANCED TOPICS IN OPTOELECTRONICS, MICROELECTRONICS, AND NANOTECHNOLOGIES, 2002, 5227 : 312 - 317
  • [29] Parameters mensuration of metal powder flow in laser cladding
    Yang N.
    Dong H.
    Guangxue Xuebao/Acta Optica Sinica, 2011, 31 (SUPPL.1):
  • [30] Effect of laser parameters on the measurement of U/Nd ratio using pulsed laser deposition followed by isotopic dilution mass spectrometry
    Sajimol, R.
    Manoravi, P.
    Bera, S.
    Joseph, M.
    INTERNATIONAL JOURNAL OF MASS SPECTROMETRY, 2015, 387 : 51 - 55
12345