Effect of metallocene polyethylene on heat sealing properties of low density polyethylene blends

被引：0

作者：

Sierra, JD ^{[1
]}

Noriega, MD ^{[1
]}

Osswald, TA ^{[1
]}

机构：

[1] ICIPC, Juan D Sierra Inst Capacitac & Invest Plast & Cau, Medellin, Colombia

来源：

ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS; | 1999年

关键词：

D O I：

暂无

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Laminations made with blends of metallocene Polyethylene (m-PE) and high-pressure low density Polyethylene (LDPE) were prepared to investigate the effect of the former resin on heat sealing performance. According to various experimental studies of seal strength, hot tack and differential scanning calorimeter (DSC), it could be concluded that percentages around 15% of m-PE allow to obtain the optimal balance for heat sealing properties and cost. Using the interdiffusion theory of heat sealing, a thorough discussion of the results was done.

引用

页码：2056 / 2060

页数：5

共 50 条

[31] Correlation of structure, rheological, thermal, mechanical, and optical properties in Low Density Polyethylene/Linear Low Density Polyethylene blends in the presence of recycled Low Density Polyethylene and Linear Low Density Polyethylene
Esmaeilzade, Romina
Stainslavovich, Kozodaev Alexey
Jandaghian, Mohammad Hossein
Hosseini, Leila Sadat Rokni
Saleh, Luma Hussain
Zarghampour, Simin
POLYMER ENGINEERING AND SCIENCE, 2024, 64 (03): : 1286 - 1298
[32] Influence of branching characteristics on thermal and mechanical properties of Ziegler-Natta and metallocene hexene linear low-density polyethylene blends with low-density polyethylene
Hussein, IA
Hameed, T
JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 97 (06) : 2488 - 2498
[33] Effect of metallocene-catalyzed polyethylene on the rheological and mechanical properties of poly(phenylene sulfide)/polyethylene blends
Lee, BS
Chun, BC
Chung, YC
FIBERS AND POLYMERS, 2004, 5 (02) : 145 - 150
[34] Effect of metallocene-catalyzed polyethylene on the rheological and mechanical properties of poly(phenylene sulfide)/polyethylene blends
Bo Sun Lee
Byoung Chul Chun
Yong-Chan Chung
Fibers and Polymers, 2004, 5 : 145 - 150
[35] Effect of heat treatment on dynamic viscoelastic properties of immiscible polycarbonate linear low density polyethylene blends
Nakayama, K
Tanaka, K
ADVANCED COMPOSITE MATERIALS, 1997, 6 (04) : 327 - 339
[36] Linear low density polyethylene: Microstructure and sealing properties correlation
Simanke, Adriane G.
de Lemos, Cristovao
Pires, Marcia
POLYMER TESTING, 2013, 32 (02) : 279 - 290
[37] Crystallization characteristics of metallocene low density polyethylene
Kim, K
Han, JW
Cho, B
Kang, HJ
POLYMER-KOREA, 2001, 25 (06) : 833 - 839
[38] CHARACTERIZATION AND PROPERTIES OF POLYETHYLENE BLENDS .1. LINEAR LOW-DENSITY POLYETHYLENE WITH HIGH-DENSITY POLYETHYLENE
HU, SR
KYU, T
STEIN, RS
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1987, 25 (01) : 71 - 87
[39] Effect of molecular weight and long chain branching of metallocene elastomers on the properties of high density polyethylene blends
Guimaraes, MWC
Coutinho, FMB
Rocha, MCG
Farah, A
Bretas, RES
POLYMER TESTING, 2003, 22 (08) : 843 - 847
[40] On the cocrystallization phenomenon in blends of high density polyethylene and low density polyethylene
C. C. Puig
Polymer Bulletin, 1997, 38 : 715 - 720

← 1 2 3 4 5 →