Analysis of Micro Burr Formation in Austenitic Stainless Steel X5CrNi18-10

被引：39
|
作者：
Biermann, D. [1 ]
Steiner, M. [1 ]
机构：
[1] TU Dortmund, Inst Machining Technol, D-44227 Dortmund, Germany
来源：
45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 | 2012年 / 3卷
关键词：
Micromilling; Burr Formation; Austenitic Stainless Steel;
D O I：
10.1016/j.procir.2012.07.018
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the results on the analysis of micro-burr formation for slot milling of austenitic stainless steel X5CrNi18-10. Two-fluted submicron grain cemented carbide tools with a diameter of d = 0.5 mm were used. Applying cutting speeds from v(c) = 100 m/min to v(c) = 200 m/min and feeds per tooth from f(z) = 6 mu m to f(z) = 8 mu m the influence of these parameters on the burr formation was investigated. Additionally the effect of the lubrication method - minimum quantity lubrication, flood lubrication and bath lubrication - on the burr formation was analysed. (c) 2012 The Authors. Published by Elsevier B.V. Selection and/or peer-review under responsibility of Professor D. Mourtzis and Professor G. Chryssolouris.
引用
收藏
页码：97 / 102
页数：6
相关论文
共 50 条
  • [21] EXTENDED ABSTRACT Microstructure, roughness, and corrosion resistance of X5CrNi18-10 austenite stainless steel welded joint
    Radojkovic, Bojana M.
    Jegdic, Bore, V
    Kovacina, Jovanka N.
    Stevanovic, Sanja, I
    Marunkic, Dunja D.
    JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 2021, 86 (04) : 407 - 413
  • [22] Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel
    Uzun, H
    Donne, CD
    Argagnotto, A
    Ghidini, T
    Gambaro, C
    MATERIALS & DESIGN, 2005, 26 (01): : 41 - 46
  • [23] Influence of welding parameters on pit initiation and pit growth in welded joints of X5CrNi18-10 stainless steel
    Bore V. Jegdić
    Biljana M. Bobić
    Bojana M. Radojković
    Behar Alić
    Welding in the World, 2019, 63 : 167 - 179
  • [24] Influence of welding parameters on pit initiation and pit growth in welded joints of X5CrNi18-10 stainless steel
    Jegdic, Bore V.
    Bobic, Biljana M.
    Radojkovic, Bojana M.
    Alic, Behar
    WELDING IN THE WORLD, 2019, 63 (01) : 167 - 179
  • [25] Influence of welding parameters on pit initiation and pit growth in welded joints of X5CrNi18-10 stainless steel
    Jeddić, Bore V.
    Bobić, Biljana M.
    Radojković, Bojana M.
    Alić, Behar
    Rivista Italiana della Saldatura, 2020, 72 (02): : 169 - 186
  • [26] Assessment of Corrosion Resistance and Hardness of Shot Peened X5CrNi18-10 Steel
    Walczak, Mariusz
    Szala, Miroslaw
    Okuniewski, Wojciech
    MATERIALS, 2022, 15 (24)
  • [27] DETERMINATION OF SUSCEPTIBILITY TO INTERGRANULAR CORROSION OF STAINLESS STEELS TYPE X5CrNi18-10 IN FIELD
    Jegdic, Bore V.
    Bobic, Biljana M.
    METALLURGICAL & MATERIALS ENGINEERING, 2016, 22 (04) : 251 - 259
  • [28] Residual Stress Engineering for Wire Drawing of Austenitic Stainless Steel X5CrNi18-10 by Variation in Die Geometries-Effect of Drawing Speed and Process Temperature
    Selbmann, Rene
    Gibmeier, Jens
    Simon, Nicola
    Kraeusel, Verena
    Bergmann, Markus
    MATERIALS, 2024, 17 (05)
  • [29] NUMERICAL PREDICTION OF DEFORMATIONS IN LASER WELDED SHEETS MADE OF X5CrNi18-10 STEEL
    Piekarska, W.
    Kubiak, M.
    Saternus, Z.
    Stano, S.
    Domanski, T.
    ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (03) : 1965 - 1972
  • [30] Influence of Surface Preparation of Aluminum Alloy AW-5754 and Stainless Steel X5CRNI18-10 on the Properties of Bonded Joints
    Zdravkovic, Natasa
    Klobcar, Damjan
    Milcic, Dragan
    Zupancic, Matevz
    Zuzek, Borut
    Milcic, Miodrag
    Duric, Aleksija
    MATERIALS, 2024, 17 (11)
12345