Factors influencing acousto-ultrasonic approach to impact damage in composite materials

被引：2
|
作者：
Kong, Huanping [1 ]
Zhang, Zheng [1 ]
Li, Lifei [1 ]
机构：
[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China
来源：
BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING, PTS 1-3 | 2012年 / 393-395卷
关键词：
Acousto-ultrasonic; impact damage; influencing factors; composite;
D O I：
10.4028/www.scientific.net/AMR.393-395.97
中图分类号：
Q81 [生物工程学（生物技术）]; Q93 [微生物学];
学科分类号：
071005 ; 0836 ; 090102 ; 100705 ;
摘要：
This paper studied factors influencing AU detection results on different damage specimens, including simulation frequency, transducer modes and transducer location. Correlation between acousto-ultrasonic parameters (AUP1, AUP2) and impact damage severity in composite was investigated. The results showed that as damage severity increased, AUP1 and AUP2 of three different transducers decreased. Applying low frequency transducer, the variation of AUP1 may indicate a more rapid detection prospect. In addition, applying S1-transducer and WD-transducer, AUP2 was more effective for the early damage detection. Varying transducer's location, S1-transducer applying 500khz simulation frequency presented a valuable results.
引用
收藏
页码：97 / 101
页数：5
相关论文
共 50 条
  • [31] Acousto-ultrasonic non-destructive evaluation of fatigue damage in steel-belted radial tyres
    dos Reis, H.L.M.
    Warmann, K.A.
    Insight: Non-Destructive Testing and Condition Monitoring, 1994, 36 (12): : 958 - 963
  • [32] ACOUSTO-ULTRASONIC INPUT-OUTPUT CHARACTERIZATION OF UNIDIRECTIONAL FIBER COMPOSITE PLATE BY SV WAVES.
    Liao, Peter
    Williams, James H.
    NASA Contractor Reports, 1988, (4152):
  • [33] INDUSTRIAL APPLICATION OF ACOUSTO-ULTRASONIC SIGNAL QUALITY AND ROBUST TIME-OF-FLIGHT ESTIMATION FOR ANISOTROPIC MATERIALS
    Jerabek, Ladislav
    Bartos, Anthony L.
    Strycek, Jan
    2011 IEEE INTERNATIONAL CONFERENCE ON ACOUSTICS, SPEECH, AND SIGNAL PROCESSING, 2011, : 1793 - 1796
  • [34] Acousto-Ultrasonic Inspection of Pre-baked Carbon Anodes: Repeatability Analysis and Assessment of Damage Detection Performance
    Daniel Rodrigues
    Donald Picard
    Carl Duchesne
    Julien Lauzon-Gauthier
    Journal of Nondestructive Evaluation, 2024, 43
  • [35] Acousto-Ultrasonic Inspection of Pre-baked Carbon Anodes: Repeatability Analysis and Assessment of Damage Detection Performance
    Rodrigues, Daniel
    Picard, Donald
    Duchesne, Carl
    Lauzon-Gauthier, Julien
    JOURNAL OF NONDESTRUCTIVE EVALUATION, 2024, 43 (01)
  • [36] Characterization of composite materials by ultrasonic methods: modelization and application to impact damage
    Potel, C
    Chotard, T
    de Belleval, JF
    Benzeggagh, M
    COMPOSITES PART B-ENGINEERING, 1998, 29 (02) : 159 - 169
  • [37] Factors influencing the ballistic impact mechanisms of textile composite materials: a review
    Dewangan, Mithilesh Kumar
    Panigrahi, Sashi Kanta
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2021, 32 (05) : 1901 - 1923
  • [38] Effect of Cryogenic Temperatures on Guided Waves Structural Health Monitoring Using Acousto-Ultrasonic Piezocomposite Transducers on Composite Structures
    Galiana, S.
    Moix-Bonet, M.
    Schmidt, D.
    Wierach, P.
    e-Journal of Nondestructive Testing, 2024, 29 (07):
  • [39] Ultrasonic Impact Damage Assessment in 3D Woven Composite Materials
    Mannai, E.
    Lamboul, B.
    Roche, J. M.
    41ST ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 34, 2015, 1650 : 1280 - 1286
  • [40] Nondestructive evaluation of FRP-reinforced structures bonded joints using acousto-ultrasonic: Towards diagnostic of damage state
    Sarr, Cheikh A. T.
    Chataigner, Sylvain
    Gaillet, Laurent
    Godin, Nathalie
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 313
12345