Flow and Heat Transfer Characteristics of Multiple Impinging Jets: Large Eddy Simulation

被引：0
|
作者：
Draksler, Martin [1 ]
Koncar, Bostjan [1 ]
Cizelj, Leon [1 ]
Niceno, Bojan [2 ]
机构：
[1] Jozef Stefan Inst, Jamova Cesta 39, Ljubljana 1000, Slovenia
[2] Paul Scherrer Inst, CH-5232 Villigen, Switzerland
来源：
22ND INTERNATIONAL CONFERENCE NUCLEAR ENERGY FOR NEW EUROPE, (NENE 2013) | 2013年
关键词：
MATRIX;
D O I：
暂无
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
The flow and heat transfer characteristics of highly turbulent impinging jets are analyzed numerically by the means of Large Eddy Simulation. Experimental conditions at the nozzle plate (domain inlet) are not known, and therefore sensitivity analysis of the inlet boundary condition has been performed. Three different velocity profiles are tested, namely the flat velocity profile, the fitted profile from the precursor RANS simulation, and the flat velocity profile with additional pseudo-random fluctuations. The mean flow and heat transfer characteristics, obtained by time-averaging of the instantaneous results, are discussed and compared with available experimental data.
引用
收藏
页数：9
相关论文
共 50 条
  • [31] Unsteady heat transfer of multiple impinging jets
    Draksler, M.
    Koncar, B.
    Cizelj, L.
    Niceno, B.
    PROCEEDINGS OF THE EIGHTH INTERNATIONAL SYMPOSIUM ON TURBULENCE HEAT AND MASS TRANSFER (THMT-15), 2015, : 323 - 326
  • [32] HEAT TRANSFER CHARACTERISTICS OF SWIRLING IMPINGING JETS
    Brown, Karl J.
    Murray, Darina B.
    Persoons, Tim
    O'Donovan, Tadhg S.
    IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 9, PTS A-C, 2010, : 1879 - 1889
  • [33] HEAT TRANSFER CHARACTERISTICS OF SWIRLING IMPINGING JETS
    Brown, Karl J.
    Persoons, Tim
    Murray, Darina B.
    PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 5: FUEL CELLS, GAS TURBINES, HEAT PIPES, JET IMPINGEMENT, RADIATION, 2010, : 657 - 665
  • [34] LARGE EDDY SIMULATION OF SLURRY EROSION IN SUBMERGED IMPINGING JETS
    Wang, Qiuchen
    Huang, Qiyu
    Sun, Xu
    Zhang, Jun
    Karimi, Soroor
    Shirazi, Siamack A.
    PROCEEDINGS OF THE ASME 2020 FLUIDS ENGINEERING DIVISION SUMMER MEETING (FEDSM2020), VOL 3, 2020,
  • [35] Heat Transfer Coefficient and Flow Characteristics of Hot Steel Plate Cooling by Multiple Inclined Impinging Jets
    Xie, Qian
    Wang, Bingxing
    Wang, Zhaodong
    Wang, Guodong
    ISIJ INTERNATIONAL, 2016, 56 (12) : 2236 - 2242
  • [36] LARGE-EDDY SIMULATION AND CONJUGATE HEAT TRANSFER IN A ROUND IMPINGING JET
    Shum-Kivan, Francis
    Duchaine, Florent
    Gicquel, Laurent
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 5A, 2014,
  • [37] Flow and heat transfer of parallel multiple jets obliquely impinging on a flat surface
    Li, Yiming
    Li, Baokuan
    Qi, Fengsheng
    Cheung, Sherman C. P.
    APPLIED THERMAL ENGINEERING, 2018, 133 : 588 - 603
  • [38] Numerical study of heat transfer and fluid flow in multiple turbulent impinging jets
    Drying Technol, 5-7 (1359):
  • [39] Heat transfer due to impinging co-axial jets and the jets' fluid flow characteristics
    Celik, Nevin
    Eren, Haydar
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2009, 33 (04) : 715 - 727
  • [40] Large-Eddy Simulation Study of Flow and Heat Transfer in Swirling and Non-Swirling Impinging Jets on a Semi-Cylinder Concave Target
    Xu, Liang
    Zhao, Xu
    Xi, Lei
    Ma, Yonghao
    Gao, Jianmin
    Li, Yunlong
    APPLIED SCIENCES-BASEL, 2021, 11 (15):
12345