Mechanical properties of AlSi10Mg produced by Selective Laser Melting

被引：574
|
作者：
Kempen, K. [1 ]
Thijs, L. [2 ]
Van Humbeeck, J. [2 ]
Kruth, J. -P. [1 ]
机构：
[1] Katholieke Univ Leuven, Univ Leuven, Dept Mech Engn, Celestijnenlaan 300B, B-3001 Louvain, Belgium
[2] Univ Leuven, KU Leuven, Dept Met & Mat Engn, B-3001 Leuven, Belgium
来源：
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) | 2012年 / 39卷
关键词：
Selective Laser Melting; AlSi10Mg; hardness; tensile strength;
D O I：
10.1016/j.phpro.2012.10.059
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
Selective Laser Melting (SLM) is an Additive Manufacturing (AM) technique in which a part is built up in a layer-by-layer manner by melting the top surface layer of a powder bed with a high intensity laser according to sliced 3D CAD data. In this work, mechanical properties like tensile strength, elongation, Young's modulus, impact toughness and hardness are investigated for SLM-produced AlSi10Mg parts, and compared to conventionally cast AlSi10Mg parts. It is shown that AlSi10Mg parts with mechanical properties comparable or even exceeding to those of conventionally cast AlSi10Mg can be produced by SLM. (C) 2012 Published by Elsevier B.V. Selection and/or review under responsibility of Bayerisches Laserzentrum GmbH
引用
收藏
页码：439 / 446
页数：8
相关论文
共 50 条
  • [21] On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
    Trevisan, Francesco
    Calignano, Flaviana
    Lorusso, Massimo
    Pakkanen, Jukka
    Aversa, Alberta
    Ambrosio, Elisa Paola
    Lombardi, Mariangela
    Fino, Paolo
    Manfredi, Diego
    [J]. MATERIALS, 2017, 10 (01):
  • [22] The influence of a process interruption on tensile properties of AlSi10Mg samples produced by selective laser melting
    Hammond, Vincent
    Schuch, Michael
    Bleckmann, Matthias
    [J]. RAPID PROTOTYPING JOURNAL, 2019, 25 (08) : 1442 - 1452
  • [23] Friction Stir Welding of AlSi10Mg Plates Produced by Selective Laser Melting
    Scherillo F.
    Astarita A.
    Prisco U.
    Contaldi V.
    di Petta P.
    Langella A.
    Squillace A.
    [J]. Metallography, Microstructure, and Analysis, 2018, 7 (4) : 457 - 463
  • [24] Investigation of high temperature behavior of AlSi10Mg produced by selective laser melting
    Biffi, Carlo Alberto
    Bassani, Paola
    Fiocchi, Jacopo
    Giuranno, Donatella
    Novakovic, Rada
    Tuissi, Ausonio
    Ricci, Enrica
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2021, 259
  • [25] Studies on hardness and tensile testing of AlSi10Mg produced by selective laser melting
    Suresha, S.
    Raghavendra, Subramanya
    [J]. JOURNAL OF MATERIALS AND ENGINEERING STRUCTURES, 2023, 10 (03): : 415 - 422
  • [26] Friction stir processing of AlSi10Mg parts produced by selective laser melting
    Maamoun, Ahmed H.
    Veldhuis, Stephen C.
    Elbestawi, Mohamed
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 263 : 308 - 320
  • [27] Fatigue life prediction for AlSi10Mg components produced by selective laser melting
    Tang, Ming
    Pistorius, Petrus Christiaan
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2019, 125 : 479 - 490
  • [28] Microstructure and Properties of AlSi10Mg Fabricated by Selective Laser Melting (SLM)
    Bai, P. K.
    Zhao, Z. Y.
    Li, J.
    Wu, L. Y.
    Liang, M. J.
    Tan, L.
    Liao, H. H.
    [J]. LASERS IN ENGINEERING, 2019, 44 (1-3) : 157 - 167
  • [29] Research on Microstructure and Properties of AlSi10Mg Fabricated by Selective Laser Melting
    Pan, Wei
    Ye, Zhanggen
    Zhang, Yongzhong
    Liu, Yantao
    Liang, Bo
    Zhai, Ziyu
    [J]. MATERIALS, 2022, 15 (07)
  • [30] Rapid Solidification: Selective Laser Melting of AlSi10Mg
    Tang, Ming
    Pistorius, P. Chris
    Narra, Sneha
    Beuth, Jack L.
    [J]. JOM, 2016, 68 (03) : 960 - 966
12345