Mechanical properties of AlSi10Mg produced by Selective Laser Melting

被引：574

作者：

Kempen, K. ^{[1
]}

Thijs, L. ^{[2
]}

Van Humbeeck, J. ^{[2
]}

Kruth, J. -P. ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Univ Leuven, Dept Mech Engn, Celestijnenlaan 300B, B-3001 Louvain, Belgium

[2] Univ Leuven, KU Leuven, Dept Met & Mat Engn, B-3001 Leuven, Belgium

来源：

LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) | 2012年 / 39卷

关键词：

Selective Laser Melting; AlSi10Mg; hardness; tensile strength;

D O I：

10.1016/j.phpro.2012.10.059

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Selective Laser Melting (SLM) is an Additive Manufacturing (AM) technique in which a part is built up in a layer-by-layer manner by melting the top surface layer of a powder bed with a high intensity laser according to sliced 3D CAD data. In this work, mechanical properties like tensile strength, elongation, Young's modulus, impact toughness and hardness are investigated for SLM-produced AlSi10Mg parts, and compared to conventionally cast AlSi10Mg parts. It is shown that AlSi10Mg parts with mechanical properties comparable or even exceeding to those of conventionally cast AlSi10Mg can be produced by SLM. (C) 2012 Published by Elsevier B.V. Selection and/or review under responsibility of Bayerisches Laserzentrum GmbH

引用

下载

页码：439 / 446

页数：8

共 50 条

[1] Microstructrue and Mechanical Properties of Selective Laser Melting AlSi10Mg
Gong, Weiyan
Qi, Junfeng
Wang, Zhe
Chen, Yi
Jiang, Jiang
Wang, Zhen
Qi, Yuanhao
3RD INTERNATIONAL SYMPOSIUM OF SPACE OPTICAL INSTRUMENTS AND APPLICATIONS, 2017, 192 : 113 - 120
[2] Effect of build atmosphere on the mechanical properties of AlSi10Mg produced by selective laser melting
Rakesh, Srinivasa Ch
Priyanka, Nadig
Jayaganthan, R.
Vasa, Nilesh J.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 17231 - 17238
[3] Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting
Ming Tang
Petrus Christiaan Pistorius
JOM, 2017, 69 : 516 - 522
[4] Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting
Tang, Ming
Pistorius, Petrus Christiaan
JOM, 2017, 69 (03) : 516 - 522
[5] AlSi10Mg Alloy Samples Produced by Selective Laser Melting
Orekhov A.A.
Rabinskiy L.N.
Tereshchenko T.S.
Russian Engineering Research, 2024, 44 (03) : 383 - 388
[6] Laser Weldability of AlSi10Mg Alloy Produced by Selective Laser Melting: Microstructure and Mechanical Behavior
Biffi, Carlo Alberto
Fiocchi, Jacopo
Tuissi, Ausonio
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) : 6714 - 6719
[7] Laser Weldability of AlSi10Mg Alloy Produced by Selective Laser Melting: Microstructure and Mechanical Behavior
Carlo Alberto Biffi
Jacopo Fiocchi
Ausonio Tuissi
Journal of Materials Engineering and Performance, 2019, 28 : 6714 - 6719
[8] The Influence of Selective Laser Melting Parameters on Density and Mechanical Properties of AlSi10Mg
Raus, A. A.
Wahab, M. S.
Shayfull, Z.
Kamarudin, K.
Ibrahim, M.
2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016), 2016, 78
[9] Effects of Heat Treatments on Microstructure and Mechanical Properties of AlSi10Mg Alloy Produced by Selective Laser Melting
Wang Yue
Wang Jijie
Zhang Hao
Zhao Hongbo
Ni Dingrui
Xiao Bolv
Ma Zongyi
ACTA METALLURGICA SINICA, 2021, 57 (05) : 613 - 622
[10] Mechanical properties of AlSi10Mg lattice structures fabricated by selective laser melting
Li, Zhong-hua
Nie, Yun-fei
Liu, Bin
Kuai, Ze-zhou
Zhao, Miao
Liu, Fei
MATERIALS & DESIGN, 2020, 192

← 1 2 3 4 5 →