Dynamic recrystallization mechanisms of an Fe-8% Al low density steel under hot rolling conditions

被引：112
|
作者：
Castan, C. [1 ]
Montheillet, F. [2 ]
Perlade, A. [3 ]
机构：
[1] ArcelorMittal, R&D Packaging, F-57283 Maizieres Les Metz, France
[2] Ecole Mines, Ctr SMS, CNRS UMR 5146, F-42023 St Etienne 2, France
[3] ArcelorMittal, R&D Automot Prod, F-57283 Maizieres Les Metz, France
来源：
SCRIPTA MATERIALIA | 2013年 / 68卷 / 06期
关键词：
Ferritic steels; High-temperature deformation; Dynamic recrystallization; Recrystallized microstructure; Recrystallization texture; DEFORMATION; TEXTURE; METALS;
D O I：
10.1016/j.scriptamat.2012.07.037
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Iron-aluminium alloys display promising physical and mechanical properties. In this study, the effects of strain, strain rate and temperature on an Fe-8% Al were investigated. Hot torsion tests were performed in the temperature range 900-1100 degrees C and strain rate range 0.1-10 s(-1). In this alloy, two types of dynamic recrystallization may operate during hot deformation: at high temperature and high strain rate, this alloy undergoes discontinuous dynamic recrystallization, whereas at lower temperature and strain rate, continuous dynamic recrystallization occurs. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：360 / 364
页数：5
相关论文
共 50 条
  • [31] Study of dynamic recrystallization of low carbon steel in thin slab continuous rolling process
    State Key Laboratory of Advanced Steel Processes and Products, Central Iron and Steel Research Institute, Beijing 100081, China
    Acta Metal Sin, 2006, 4 (265-270):
  • [32] Study of the austenite recrystallization in steel 09KhN2MD using the stress relaxation method under hot rolling conditions
    Soshina T.V.
    Zisman A.A.
    Khlusova E.I.
    Inorganic Materials: Applied Research, 2013, 4 (06) : 487 - 493
  • [33] Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
    Sakai, Taku
    Belyakov, Andrey
    Kaibyshev, Rustam
    Miura, Hiromi
    Jonas, John J.
    PROGRESS IN MATERIALS SCIENCE, 2014, 60 : 130 - 207
  • [34] Research on the Critical Conditions for Initial Dynamic Recrystallization of a Low Carbon Low Alloyed Steel
    Zhao, Bao-Chun
    Li, Gui-Yan
    Liu, Feng-Lian
    Hu, Xin-Ming
    INTERNATIONAL CONFERENCE ON MECHANICS AND CONTROL ENGINEERING (MCE 2015), 2015, : 522 - 527
  • [35] DYNAMIC RECRYSTALLIZATION OF FERRITE IN A LOW-CARBON STEEL DURING HOT-ROLLING IN THE (F+A) 2-PHASE RANGE
    WANG, RZ
    LEI, TC
    SCRIPTA METALLURGICA ET MATERIALIA, 1994, 31 (09): : 1193 - 1196
  • [36] Microstructure Evolution and Dynamic Recrystallization of a Low Density Steel during Isothermal Compression
    Sun, Jian
    Li, Jinghui
    Huang, Zhenyi
    Zhang, Xiaofeng
    Wang, Dongsheng
    Liu, Shuqing
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2024, 38 (10): : 768 - 781
  • [37] Wear mechanisms of high chromium iron roll under hot rolling conditions
    Cui, PY
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 1997, 4 (01) : 44 - 49
  • [38] Wear　Mechanisms　of　High　Chromium　Iron　Roll　under　Hot　Rolling　Conditions
    Cui PeiyongCentral Iron and Steel Research Institute
    JournalofIronandSteelResearch(International), 1997, 4 (01) : 46 - 51
  • [39] Dynamic recrystallization under hot deformation of additively manufactured 316 L stainless steel
    Khodabakhshi, F.
    Hasani, N.
    Kalaie, M. R.
    Hadadzadeh, A.
    Wells, M. A.
    Mohammadi, M.
    MATERIALS CHARACTERIZATION, 2023, 202
  • [40] Effects of Cryogenic Rolling on the Microstructure Evolution and Mechanical Properties of Low-Density Fe-28Mn-8Al-1C Steel
    Xiong, Yi
    Luan, Ze-wei
    Zha, Xiao-qin
    Li, Yong
    Du, Xiu-ju
    Ren, Feng-zhang
    Wang, Shu-bo
    Liu, Xiao-jun
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (10)
12345