Modelling rotor skew in induction machines using 2D and 3D finite element schemes

被引：1
|
作者：
Lai, HC
Rodger, D
机构：
来源：
1997 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE RECORD | 1997年
关键词：
D O I：
10.1109/IEMDC.1997.604325
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Induction machines are modelled using both 2D and 3D finite elements. The A-psi method is used in 3D. Skewed rotor slots are modelled in 2D by dividing the machine into short axial sections, each of which is rotated by a small amount to simulate rotor skew.
引用
收藏
页码：WB351 / WB353
页数：3
相关论文
共 50 条
  • [1] Comparison Between 2D and 3D Modelling of Induction Machine Using Finite Element Method
    Ferkova, Zelmira
    [J]. ADVANCES IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2015, 13 (02) : 120 - 126
  • [2] 2D and 3D Finite Element Modeling of Electrical Machines
    Sabonnadiere, JC
    Foggia, A
    [J]. IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM 1997, VOLS 1-4, 1997, : 1326 - 1329
  • [3] Comparison of 2D and 3D finite element modelling results of a skewed induction machine
    Lai, HC
    Rodger, D
    [J]. INTERNATIONAL CONFERENCE ON POWER ELECTRONICS, MACHINES AND DRIVES, 2002, (487): : 365 - 368
  • [4] Finite Element 2D and 3D Models of a Rotor Bar Breakage in a Squirrel-Cage Induction Motor
    Fireteanu, V.
    Constantin, A-I.
    Zorig, A.
    [J]. 2019 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DAGNOSIS (WEMDCD), VOL 1, 2019, : 157 - 162
  • [5] Modelling microwave boxed structures by 2D and 3D finite element method
    Madrangeas, V.
    Verdeyme, S.
    Aubourg, M.
    Guillon, P.
    [J]. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 1994, 13 (Suppl A) : 335 - 340
  • [6] Analysis of skewed slots in induction machines by using 2D finite element method
    Roger-Folch, J
    Joares, VJL
    Lazaro, EG
    [J]. COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 1998, 17 (1-3) : 212 - 218
  • [7] Analysis of skewed slots in induction machines by using 2D finite element method
    [J]. COMPEL Int J Comput Math Electr Electron Eng, 1-3 (212-218):
  • [8] On the 2D and 3D finite element simulation in orthopaedy using MRI
    Bartos, M
    Kestranek, Z
    Kestránek, Z
    Nedoma, J
    Stehlík, J
    [J]. MATHEMATICS AND COMPUTERS IN SIMULATION, 1999, 50 (1-4) : 115 - 121
  • [9] Predicting fracture using 2D finite element modelling
    MacNeil, J. A. M.
    Adachih, J. D.
    Goltzman, D.
    Josse, R. G.
    Kovacs, C. S.
    Prior, J. C.
    Olszynski, W.
    Davison, K. S.
    Kaiser, S. M.
    [J]. MEDICAL ENGINEERING & PHYSICS, 2012, 34 (04) : 478 - 484
  • [10] 2D and 3D finite element analyses of overlapping tunnels
    Chen, Xian-Guo
    Wang, Xian-Jun
    [J]. Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University, 2003, 38 (06):
12345