Linear friction welding of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with dissimilar microstructure

被引：45
|
作者：
Ji, Yingping [1 ]
Chai, Zhenzhen [1 ]
Zhao, Dalong [1 ]
Wu, Sujun [1 ]
机构：
[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2014年 / 214卷 / 04期
关键词：
Linear friction welding; Titanium alloys; Microstructure; Formation mechanism; Recrystallization; STAINLESS-STEEL; FATIGUE PROPERTIES; TITANIUM-ALLOY; TI-6AL-4V; ALUMINUM; MECHANISM; EVOLUTION; JOINTS;
D O I：
10.1016/j.jmatprotec.2013.11.006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dissimilar linear friction welding of Ti-5Al-2Sn-2Zr-4Mo-4Cr with bimodal and lamellar microstructures was produced. The microstructure evolution of the joint was investigated via OM, SEM, XRD, TEM and microhardness analysis. The temperature field of joint was calculated by a numerical model. The typical microstructures of weld center were recrystallized p grains with some acicular alpha '' martensites. In the case of thermo-mechanically affected zone, some partial re-crystallization grains formed in severely deformed microstructures, where a mass of dislocations were observed. However, dislocations were rarely found in the recrystallized beta grains of weld center, the temperature field of weld joints calculated was consistent with the microstructural evolution. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：979 / 987
页数：9
相关论文
共 50 条
  • [21] Deformation behavior of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with two initial microstructures during hot working
    Luo, Jiao
    Li, Lian
    Li, Miao-quan
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (02) : 414 - 422
  • [22] Plastic flow modeling of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy at elevated temperatures and high strain rates
    Baolin Wang
    Xing Ai
    Zhanqiang Liu
    Jigang Liu
    [J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2015, 30 : 611 - 616
  • [23] Plastic Flow Modeling of Ti-5Al-2Sn-2Zr-4Mo-4Cr Alloy at Elevated Temperatures and High Strain Rates
    Wang Baolin
    Ai Xing
    Liu Zhanqiang
    Liu Jigang
    [J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2015, 30 (03): : 611 - 616
  • [24] Microstructural response at the interface and its effect on the fatigue fracture behavior of rotary friction welded dissimilar titanium alloys: Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) and Ti-6Al-2Sn-4Zr-2Mo (Ti6242)
    Wang, Binwen
    Chen, Xianmin
    Yang, Jun
    Jin, Feng
    Wang, Qian
    [J]. MATERIALS RESEARCH EXPRESS, 2021, 8 (10)
  • [25] Ti-5Al-2Sn-2Zr-4Mo-4Cr 合金本构关系的新模型
    张兴全
    彭颖红
    阮雪榆
    [J]. 上海交通大学学报, 1999, (02) : 50 - 53
  • [26] Deep Understanding of the Influence of the Process Parameters During Linear Friction Welding on the Joint Quality and the Microstructural Changes of Two Mono-Material Titanium Alloy Joints: The β-Metastable Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) and the Near-α Ti-6Al-2Sn-4Zr-2Mo (Ti6242)
    Dorick Ballat-Durand
    Salima Bouvier
    Marion Risbet
    [J]. Metallurgical and Materials Transactions A, 2020, 51 : 263 - 278
  • [27] Enhancement of fatigue resistance by direct aging treatment in electron beam welded Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy joint
    Liu, Hanqing
    Song, Jun
    Cao, Xiaojian
    Xu, Luopeng
    Du, Yaohan
    Li, Lang
    Wang, Qingyuan
    Chen, Qiang
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 829
  • [28] Deep Understanding of the Influence of the Process Parameters During Linear Friction Welding on the Joint Quality and the Microstructural Changes of Two Mono-Material Titanium Alloy Joints: The β-Metastable Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) and the Near-α Ti-6Al-2Sn-4Zr-2Mo (Ti6242)
    Ballat-Durand, Dorick
    Bouvier, Salima
    Risbet, Marion
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (01): : 263 - 278
  • [29] Joining of Dissimilar Alloys Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.1Si Using Linear Friction Welding
    Rajan, Sidharth
    Wanjara, Priti
    Gholipour, Javad
    Kabir, Abu Syed
    [J]. MATERIALS, 2020, 13 (17)
  • [30] Severe plastic deformation induced precipitation of the ordered α2-Ti3Al phase in Ti-5Al-2Sn-2Zr-4Mo-4Cr
    Yang, C.
    Li, M. Q.
    Liu, Y. G.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 854
12345