A mathematical model of the hydro-support: an elasto-hydrostatic thrust bearing with mixed lubrication

被引：19
|
作者：
van Ostayen, RAJ
van Beek, A
Ros, M
机构：
[1] Delft Univ Technol, Fac Mech Engn & Marine Technol, NL-2628 CD Delft, Netherlands
[2] Dutch Directorate Gen Publ Works & Water Manage, Civil Engn Div, NL-2700 AB Zoetermeer, Netherlands
来源：
TRIBOLOGY INTERNATIONAL | 2004年 / 37卷 / 08期
关键词：
mixed lubrication; hydrostatic lubrication; finite-element method;
D O I：
10.1016/j.triboint.2004.01.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A mathematical model for a new type of navigation lock-gate support, the hydro-support, is presented. The hydro-support is a hydrostatic bearing, elastically connected to the lock-gate by a rubber hinge and sliding on an elastic polymer track. The model incorporates the pertinent physical aspects of the hydro-support, including the elastic deformation of the track, the bearing and the rubber hinge and the mixed lubrication between the bearing and the track. A calculation using this model on a typical hydrosupport shows the contribution of the load carried by contact on the total load and the resulting increase of the friction forces. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：607 / 616
页数：10
相关论文
共 50 条
  • [41] A MIXED LUBRICATION MODEL APPLICABLE TO BEARING SEAL PARTS OF HYDRAULIC EQUIPMENT
    YAMAGUCHI, A
    MATSUOKA, H
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1992, 114 (01): : 116 - 121
  • [42] Numerical model of mixed lubrication for microgroove bearing considering axial reciprocating motion
    Wang J.-X.
    Ni X.-K.
    Han Y.-F.
    Xiang G.
    Xiao K.
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2019, 49 (03): : 888 - 896
  • [43] Elasto-plastic contact of rough surfaces: a mixed-lubrication model for the textured surface analysis
    Meng, Xianghui
    Gu, Chunxing
    Xie, Youbai
    MECCANICA, 2017, 52 (07) : 1541 - 1559
  • [44] MATHEMATICAL MODEL OF INDIVIDUAL LUBRICATION SYSTEM FOR BEARING ASSEMBLY OF INTERNAL COMBUSTION ENGINE TURBOCHARGER
    Galimov, Robert
    Galiev, Ilgiz
    Kulakov, Alexander
    Galimov, Engel
    20TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT, 2021, : 26 - 31
  • [45] Elasto-plastic contact of rough surfaces: a mixed-lubrication model for the textured surface analysis
    Xianghui Meng
    Chunxing Gu
    Youbai Xie
    Meccanica, 2017, 52 : 1541 - 1559
  • [46] Thermo-elasto-hydrodynamic lubrication model for journal bearing including shear rate-dependent viscosity
    Austrian Competence Center for Tribology, Wr. Neustadt, Austria
    不详
    不详
    不详
    Lubr Sci, 2007, 4 (231-245):
  • [47] Mixed lubrication performance analysis of a novel water-lubricated thrust bearing considering transient thermal, cavitation, and turbulence
    Li, Renpan
    Hou, Liukai
    Zhou, Guangwu
    Hao, Kaiyuan
    Yang, Rongsong
    Zhou, Qinghua
    PHYSICS OF FLUIDS, 2025, 37 (01)
  • [48] Numerical Analysis of Oil Lubrication and Cooling of Roller Thrust Bearing in High-Performance Mixed-Flow Pump
    Sedlar, Milan
    Abrahamek, Petr
    ENERGIES, 2023, 16 (19)
  • [49] Analysis of Dynamic Characteristics and Skidding State of Angular Contact Bearing by Thermo-hydro-elasto-dynamic Coupling Model
    Gao S.
    Han Q.
    Chu F.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (09): : 87 - 97
  • [50] An isoviscous, isothermal model investigating the influence of hydrostatic recesses on a spring-supported tilting pad thrust bearing
    De Pellegrin, Dennis V.
    Hargreaves, Douglas J.
    TRIBOLOGY INTERNATIONAL, 2012, 51 : 25 - 35
12345