A mathematical model of the hydro-support: an elasto-hydrostatic thrust bearing with mixed lubrication

被引：19
|
作者：
van Ostayen, RAJ
van Beek, A
Ros, M
机构：
[1] Delft Univ Technol, Fac Mech Engn & Marine Technol, NL-2628 CD Delft, Netherlands
[2] Dutch Directorate Gen Publ Works & Water Manage, Civil Engn Div, NL-2700 AB Zoetermeer, Netherlands
来源：
TRIBOLOGY INTERNATIONAL | 2004年 / 37卷 / 08期
关键词：
mixed lubrication; hydrostatic lubrication; finite-element method;
D O I：
10.1016/j.triboint.2004.01.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A mathematical model for a new type of navigation lock-gate support, the hydro-support, is presented. The hydro-support is a hydrostatic bearing, elastically connected to the lock-gate by a rubber hinge and sliding on an elastic polymer track. The model incorporates the pertinent physical aspects of the hydro-support, including the elastic deformation of the track, the bearing and the rubber hinge and the mixed lubrication between the bearing and the track. A calculation using this model on a typical hydrosupport shows the contribution of the load carried by contact on the total load and the resulting increase of the friction forces. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：607 / 616
页数：10
相关论文
共 50 条
  • [1] ELASTO-HYDROSTATIC LUBRICATION OF CIRCULAR PLATE THRUST BEARING WITH POWER LAW LUBRICANTS
    SINGH, C
    NAILWAL, TS
    SINHA, P
    JOURNAL OF LUBRICATION TECHNOLOGY-TRANSACTIONS OF THE ASME, 1982, 104 (02): : 243 - 247
  • [2] Possibility of elasto-hydrostatic evolved-gas bearing as one of the mechanisms of superlubricity
    Kato, Takahisa
    Matsuoka, Hiroshige
    Kawaguchi, Masahiro
    Nosaka, Masataka
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2019, 233 (04) : 532 - 540
  • [3] On the pressure projection in elasto-hydrostatic lubrication problems - Part 1: Mechanical study of the Reynolds equation
    Sawada, T
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2005, 47 (06) : 822 - 848
  • [4] TURBULENT LUBRICATION FOR A HYDROSTATIC THRUST BEARING WITH A CIRCULAR RECESS
    HARADA, M
    MIYAJI, R
    ANADA, Y
    JSME INTERNATIONAL JOURNAL, 1987, 30 (269): : 1819 - 1825
  • [5] On the pressure projection in elasto-hydrostatic lubrication problems - Part 2: FE approximation to observe the pressure projection
    Sawada, T
    Ohta, T
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2005, 47 (06) : 849 - 866
  • [6] APPLICATION OF A MIXED LUBRICATION MODEL FOR HYDROSTATIC THRUST-BEARINGS OF HYDRAULIC EQUIPMENT
    KAZAMA, T
    YAMAGUCHI, A
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1993, 115 (04): : 686 - 691
  • [7] A Mixed Lubrication Deterministic Model of an Elastic Support Water-Lubricated Tilting Pad Thrust Bearing
    Liang, Xingxin
    Han, Muyu
    He, Tao
    Cui, Lijun
    Yang, Zhiyong
    Ouyang, Wu
    LUBRICANTS, 2023, 11 (06)
  • [8] Experiment on mixed lubrication of hydrostatic thrust bearings for hydraulic equipment
    Kazama, Toshiharu
    Yamaguchi, Atsushi
    American Society of Mechanical Engineers (Paper), 1994, : 1 - 4
  • [9] Nonlinear Control System Design for Active Lubrication of Hydrostatic Thrust Bearing
    Sha, Yuanpeng
    Lu, Changhou
    Pan, Wei
    Chen, Shujiang
    Ge, Peiqi
    COATINGS, 2020, 10 (04) : 1 - 11
  • [10] EXPERIMENT ON MIXED LUBRICATION OF HYDROSTATIC THRUST-BEARINGS FOR HYDRAULIC EQUIPMENT
    KAZAMA, T
    YAMAGUCHI, A
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1995, 117 (03): : 399 - 402
12345