Exfoliation corrosion of T6- and T8-aged AlxCuyLiz alloy

被引:29
|
作者
Li Hong-ying [1 ,2 ]
Tang Yi [1 ]
Zeng Zai-de [1 ]
Zheng Feng [1 ,2 ]
机构
[1] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Hunan, Peoples R China
[2] Cent S Univ, Key Lab Nonferrous Met Mat Sci & Engn, Minist Educ, Changsha 410083, Hunan, Peoples R China
关键词
exfoliation corrosion; Al-Cu-Li alloy; ageing treatment; intergranular precipitates;
D O I
10.1016/S1003-6326(08)60134-X
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The exfoliation corrosion behavior of a novel Al-Li alloy treated by T6- and T8-peak ageing was studied by electrochemical impedance spectroscopy(EIS) technique. The surface morphology of corroded samples was examined by scanning electron microscope(SEM). The microstructure of un-corroded samples was observed by transmission electron microscope(TEM). At early stage of immersion in EXCO, EIS plots of the two differently processed samples are composed of a capacitive arc in the high frequency range and an inductive loop in the low frequency range. Inductive loop disappears with the increasing of immersion time and two capacitive arcs appear. T6-treated alloy has higher exfoliation susceptibility than T8-treated one, suggested by different exfoliation starting time, which is 23 h and 27 h respectively. T, phase and equilibrium precipitate at the grain boundary of T6-treated alloy are larger in amount and size than those of T8-treated alloy. This is the main reason for the higher exfoliation susceptibility of T6-treated alloy.
引用
收藏
页码:778 / 783
页数:6
相关论文
共 50 条
  • [21] Effect of nitrate on exfoliation corrosion of 2A12-T4 aluminum alloy under full-immersion corrosion condition
    Zhang S.
    He Y.
    Ni B.
    Xu D.
    Yan Y.
    Cui C.
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2023, 49 (06): : 1372 - 1382
  • [22] Localized corrosion of 6056 T6 aluminium alloy in chloride media
    Guillaumin, V
    Mankowski, G
    CORROSION SCIENCE, 2000, 42 (01) : 105 - 125
  • [23] THE EFFECTS OF CORROSION ON THE MECHANICAL PROPERTIES OF ALUMINIUM ALLOY 7075-T6
    Necsulescu, Daniela Alina
    UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, 2011, 73 (01): : 223 - 229
  • [24] Fitting corrosion and fatigue behavior of aluminum alloy 7075-T6
    Sankaran, KK
    Perez, R
    Jata, KV
    ADVANCED MATERIALS & PROCESSES, 2000, 158 (02): : 53 - 54
  • [25] Investigation of corrosion behaviour of hydrogenated 7075-T6 aluminum alloy
    El-Amoush, Amjad Saleh
    Journal of Alloys and Compounds, 2007, 443 (1-2): : 171 - 177
  • [26] Susceptibility of Aluminum Alloy 7075 T6 to Stress Corrosion Cracking
    Al-Haidary, Jafar Taher
    Haddad, Jamil Sami
    Alfaqs, Fadi Anton
    Zayadin, Fouad Fakhri
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2021, 14 (02) : 195 - 201
  • [27] Investigation of corrosion behaviour of hydrogenated 7075-T6 aluminum alloy
    Ei-Amoush, Amjad Saleh
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 443 (1-2) : 171 - 177
  • [28] A STUDY OF STRESS CORROSION CRACKING IN 6061-T6 ALUMINUM ALLOY
    WHITEHOU.GD
    ALBRITTO.OW
    TABONY, JH
    DESIGN NEWS, 1970, 25 (06) : 93 - &
  • [29] Effects of Quenching on Corrosion and Hardness of Aluminum Alloy 7075-T6
    Saberi, Leila
    Alfred, Samuel Onimpa
    Amiri, Mehdi
    ENERGIES, 2022, 15 (22)
  • [30] Effects of Heat Treatment on Exfoliation Corrosion, Intergranular Corrosion, Stress Corrosion Cracking, and Joining Corrosion of AA7075 with Advanced Aging and T6
    Chen, Zhong
    Kaunitz, Leon
    Saltzmann, Daniel
    Wu, Cedric
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2020, 13 (03) : 217 - 227