Development and test of a Nb3Sn racetrack magnet using the react and wind technology

被引：0

作者：

Ambrosio, G ^{[1
]}

Andreev, N ^{[1
]}

Barzi, E ^{[1
]}

Bauer, P ^{[1
]}

Carcagno, R ^{[1
]}

Chichili, D ^{[1
]}

Ewald, K ^{[1
]}

Feher, S ^{[1
]}

Imbasciati, L ^{[1
]}

Kashikhin, VV ^{[1
]}

Limon, P ^{[1
]}

Novitski, I ^{[1
]}

Orris, D ^{[1
]}

Pischalnikov, Y ^{[1
]}

Sylvester, C ^{[1
]}

Tartaglia, M ^{[1
]}

Tompkins, J ^{[1
]}

Yadav, S ^{[1
]}

Zlobin, AV ^{[1
]}

机构：

[1] Fermilab Natl Accelerator Lab, Batavia, IL 60510 USA

来源：

ADVANCES IN CRYOGENIC ENGINEERING, VOL 47, PTS A AND B | 2002年 / 613卷

关键词：

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Fermilab is involved in the development of a high field accelerator magnet for future hadron colliders using Nb3Sn superconductor and the react-and-wind technology. The magnet design is based on single-layer common coils wound simultaneously into a laminated mechanical structure and impregnated with epoxy. In order to develop and optimize the fabrication techniques and to study the conductor performance, a magnet with flat racetrack type coils in a common coil configuration was assembled and tested. The coils were wound in the mechanical structure and in situ impregnated following a procedure that will be used in the single-layer common coil. The magnetic and mechanical design of the racetrack magnet, the fabrication techniques and the test results are presented and discussed in this paper.

引用

页码：329 / 336

页数：8

共 50 条

[31] Effect of prebending strain on CuNb/Nb3Sn superconducting coils using a react and wind method
Oguro, Hidetoshi
Nishijima, Gen
Awaji, Satoshi
Miyoshi, Kazutomi
Meguro, Shin-ichiro
Watanabe, Kazuo
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2006, 16 (02) : 1237 - 1240
[32] Pressure drop test and analysis of Nb3Sn superconducting magnet
Hao, Q. W.
Liu, H. J.
Wu, Y.
Guo, S.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2014, 497 : 58 - 61
[33] Nb3Sn wire technology for high field superconducting magnet
Saito, Kazuyoshi
Zaitsu, Kyoji
R and D: Research and Development Kobe Steel Engineering Reports, 2015, 65 (02): : 103 - 107
[34] Bending Tolerance of React&Wind Nb3Sn Conductors for Fusion Magnets
Bruzzone, Pierluigi
Bajas, Hugues
Frittitta, Chiara
Dematte, Federica
Sedlak, Kamil
Sarasola, Xabier
Corato, Valentina
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2024, 34 (05) : 1 - 4
[35] Development and Coil Fabrication Test of the Nb3Sn Dipole Magnet PRESCA2
Manil, P.
Baudouy, B.
Clement, S.
Devaux, M.
Durante, M.
Fazilleau, P.
Ferracin, P.
Fessia, P.
Garcia, J. E. Munoz
Garcia, L.
Gauthier, R.
Oberli, L.
Perez, J. C.
Pietrowicz, S.
Rifflet, J. M.
de Rijk, G.
Rondeaux, F.
Todesco, E.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2014, 24 (03)
[36] Development of a pre-bent react-and-wind CuNb/Nb3Sn multilayer superconducting coil
Nishijima, G.
Oguro, H.
Awaji, S.
Watanabe, K.
Tsubouchi, H.
Mikami, Y.
Kiyoshi, T.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2008, 21 (05):
[37] LARP long Nb3Sn racetrack coil program
Wanderer, P.
Ambrosio, G.
Anerella, M.
Barzi, E.
Bossert, R.
Cheng, D.
Cozzolino, J.
Escallier, J.
Ferracin, P.
Ganetis, G.
Ghosh, A. K.
Gupta, R. C.
Hafalia, A. R.
Hannaford, C. R.
Joshi, P.
Kovach, P.
Lietzke, A. F.
Louie, W.
Marone, A.
McInturff, A. D.
Muratore, J.
Nobrega, F.
Schmalzle, J.
Thomas, R.
Turrioni, D.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1140 - 1143
[38] Measurement of a Conduction Cooled Nb3Sn Racetrack Coil
Kim, H. S.
Kovacs, C.
Rochester, J.
Sumption, M. D.
Tomsic, M.
Peng, X.
Doll, D.
ADVANCES IN CRYOGENIC ENGINEERING - MATERIALS, 2017, 279
[39] MULTIFILAMENTARY NB3SN DIPOLE MAGNET
SAMPSON, WB
SUENAGA, M
KISS, S
IEEE TRANSACTIONS ON MAGNETICS, 1977, 13 (01) : 287 - 289
[40] Study of the effects of high temperatures during quenches on the performance of a small Nb3Sn racetrack magnet
Imbasciati, L
Bauer, P
Ambrosio, G
Lamm, M
Caspi, S
Chiesa, L
Dietderich, D
Ferracin, P
Lietzke, A
Gourlay, S
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2004, 17 (05): : S389 - S393

← 1 2 3 4 5 →