THE INFLUENCE OF THE EFFECTIVE PARAMETERS ON THE CHANGES OF EXTERNAL DIAMETER AND HARDNESS IN TUBE SPINNING PROCESS USING DESIGN OF EXPERIMENTS

被引：0

作者：

Nahrkhalaji, A. R. Fazeli ^{[1
]}

Tashnizi, E. Sharifi ^{[1
]}

机构：

[1] KN Toosi Univ Technol, Dept Mech Engn, Tehran, Iran

来源：

PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE ON COMPUTERS AND INDUSTRIAL ENGINEERING, VOLS 1-3 | 2008年

关键词：

Tube spinning; external diameter; hardness; analysis of variance (ANOVA); parametric interactions; regression;

D O I：

暂无

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Tube spinning process is considered to be an effective process for fabricating thin wall cylindrical parts with precision tolerances. In this research, the influence of major parameters of the thermomechanical tube spinning process such as preform thickness, percent of thickness reduction, rotational speed and feed rate, solution and aging treatment on the external diameter and hardness of 2024 aluminum are considered. Results of experimental evaluation are analyzed by variance analysis and a mathematic model for predicting external diameter and hardness is obtained. Finally using this model, input parameters for optimum production are achieved.

引用

页码：312 / 319

页数：8

共 50 条

[1] THE SYNCHRONIC INFLUENCE OF THE EFFECTIVE PARAMETERS ON THE EXTERNAL SURFACE ROUGHNESS AND CHANGES OF THE EXTERNAL DIAMETER IN TUBE SPINNING PROCESS USING DESIGN OF EXPERIMENTS AND OPTIMIZING THE PROCESS
Tashnizi, E. Sharifi
Nahrekhalaji, A. R. Fazeli
IMECE2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 4: DESIGN AND MANUFACTURING, 2009, : 39 - 46
[2] MODELING AND STUDYING THE IMPACTS OF EFFECTIVE PARAMETERS ON THE PARTS HARDNESS DURING THE TUBE SPINNING PROCESS BY THE DESIGN OF EXPERIMENTS
Nahrkhalaji, A. R. Fazeli
Tashnizi, E. Sharifi
IMECE2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 4: DESIGN AND MANUFACTURING, 2009, : 47 - 52
[3] STATISTICAL MODELING AND INVESTIGATION OF THE CHANGES OF THICKNESS AND PROCESS TIME IN THERMO-MECHANICAL TUBE SPINNING PROCESS USING DESIGN OF EXPERIMENTS
Tashnizi, E. Sharifi
Nahrkhalaji, A. R. Fazeli
PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE ON COMPUTERS AND INDUSTRIAL ENGINEERING, VOLS 1-3, 2008, : 305 - 311
[4] Investigation of effective parameters on surface roughness in thermomechanical tube spinning process
A. R. Fazeli
Majid Ghoreishi
International Journal of Material Forming, 2009, 2 : 261 - 270
[5] Investigation of effective parameters on surface roughness in thermomechanical tube spinning process
Fazeli, A. R.
Ghoreishi, Majid
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 (04) : 261 - 270
[6] Influence of process parameters on residual stress distribution in backward tube spinning
Duanya Jishu/Forging & Stamping Technology, 1997, 22 (04): : 23 - 25
[7] Influence of process and material parameters on impact response in composite structure: methodology using Design of Experiments
Garnier, C.
Mistou, S.
Pantale, O.
STRUCTURAL ANALYSIS OF ADVANCED MATERIALS, 2010, 446 : 83 - 90
[8] Impact of spinning conditions on the diameter and tensile properties of mesophase petroleum pitch carbon fibers using design of experiments
Sieira, Priscila
de Souza Mendes, Paulo R.
de Castro, Alexandre
Pradelle, Florian
MATERIALS LETTERS, 2021, 285
[9] Optimization of hardness and wear parameters of Al-Cu-Si alloy using design of experiments
Naveen, E.
Ilangovan, S.
MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 2704 - 2714
[10] Optimization of stereolithography process parameters for part strength using design of experiments
Chockalingam, K.
Jawahar, N.
Ramanathan, K. N.
Banerjee, P. S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 29 (1-2): : 79 - 88

← 1 2 3 4 5 →