Powder Selection in Cosintering Multi-layered Ceramic Functionally Graded Materials Based on the Densification Kinetics Curves

被引：6
|
作者：
Sun, Li [1 ]
Sneller, Adam [1 ]
Kwon, Patrick [1 ]
机构：
[1] Michigan State Univ, Dept Mech Engn, E Lansing, MI 48823 USA
来源：
JOURNAL OF COMPOSITE MATERIALS | 2009年 / 43卷 / 05期
关键词：
functionally graded material; densification rate; relative density; cosintering; PARTICLE-SIZE DISTRIBUTION; STRESSES; ALUMINA;
D O I：
10.1177/0021998308097678
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In the cosintering process to fabricate a multi-layered ceramic functionally graded material (FGM), the difference in the sintering behaviors among the layers can cause cracks or camber to form. One way to reduce the likelihood of cracks or camber in the FGM is to use powders with similar transient densification kinetics for a given set of sintering conditions. In this study, the densification kinetics characteristics of several alumina powder mixtures and zirconia powder mixtures were investigated using a thermomechanical analyzer (TMA). By comparing the densification data for the alumina and zirconia powder mixtures, a set of mixtures that exhibits a similar transient densification kinetics was found. Using this set of powders, a three-layered alumina/alumina + zirconia/zirconia FGM was successfully fabricated without cracks or camber.
引用
收藏
页码：469 / 482
页数：14
相关论文
共 50 条
  • [1] Visual measurement of layer thickness in multi-layered functionally graded metal materials
    Zuperl, U.
    Radic, A.
    Cus, F.
    Irgolic, T.
    ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2016, 11 (02): : 105 - 114
  • [2] Axisymmetric adhesive contact problem for functionally graded materials coating based on the linear multi-layered model
    Liu, Tie-Jun
    Yang, Fan
    Yu, Huifang
    Aizikovich, Sergei M.
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2021, 49 (01) : 41 - 58
  • [3] Thermal residual stresses in plates and coatings composed of multi-layered and functionally graded materials
    Shaw, LL
    COMPOSITES PART B-ENGINEERING, 1998, 29 (03) : 199 - 210
  • [4] Receding Contact Problem of Multi-Layered Elastic Structures Involving Functionally Graded Materials
    Yan, Jie
    Wang, Cong
    CRYSTALS, 2022, 12 (03)
  • [5] Modeling and design of multi-layered and graded materials
    Suresh, S
    PROGRESS IN MATERIALS SCIENCE, 1997, 42 (1-4) : 243 - 251
  • [6] Coupled vibration of functionally graded pipes conveying fluid based on a multi-layered model
    Zhu H.
    Wang W.
    Yin X.
    Gao C.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2019, 38 (20): : 203 - 209and259
  • [7] Nonlocal Timoshenko representation and analysis of multi-layered functionally graded nanobeams
    Faroughi, S.
    Sari, M. S.
    Abdelkefi, A.
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2021, 27 (03): : 893 - 911
  • [8] Nonlocal Timoshenko representation and analysis of multi-layered functionally graded nanobeams
    S. Faroughi
    M. S. Sari
    A. Abdelkefi
    Microsystem Technologies, 2021, 27 : 893 - 911
  • [9] Three-Dimensional Analyses of Functionally Graded Multi-Layered Systems
    Sburlati, Roberta
    INTERNATIONAL SYMPOSIUM ON DYNAMIC RESPONSE AND FAILURE OF COMPOSITE MATERIALS (DRAF2014), 2014, 88 : 235 - 241
  • [10] Coupled thermoelastic analysis of a multi-layered hollow cylinder based on the C-T theory and its application on functionally graded materials
    Fu, J. W.
    Chen, Z. T.
    Qian, L. F.
    COMPOSITE STRUCTURES, 2015, 131 : 139 - 150
12345