INFLUENCE OF PROCESSING PARAMETERS AND DIFFERENT CONTENT OF TiB2 CERAMICS ON THE PROPERTIES OF COMPOSITES SINTERED BY HIGH PRESSURE - HIGH TEMPERATURE (HP-HT) METHOD

被引：23

作者：

Sulima, I. ^{[1
]}

Jaworska, L. ^{[1
]}

Figiel, P. ^{[2
]}

机构：

[1] Pedag Univ, Inst Technol, PL-30084 Krakow, Poland

[2] Inst Adv Mfg Technol, PL-30011 Krakow, Poland

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2014年 / 59卷 / 01期

关键词：

high pressure-high temperature (HP-HT) sintering; titanium diboride (TiB2); austenitic stainless steel; properties; STAINLESS; MICROSTRUCTURE; BEHAVIOR;

D O I：

10.2478/amm-2014-0033

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this paper the properties of the austenitic stainless steel reinforced with various volume fractions of TiB2 ceramics have been studied. The high pressure- high temperature (HP-HT) method of sintering was applied to the formation of composites. Samples were sintered at pressure of 5 and 7 +/- 0.2 GPa and temperatures of 1273 K and 1573 K. For the tested materials, the relative density, Young's modulus and hardness were measured. In order to investigate the structure changes, the scanning electron microscope was used. The obtained results show that the temperature and pressure influence on the mechanical and physical properties of the investigated composites.

引用

页码：205 / 209

页数：5

共 30 条

[1] FRICTIONAL-PROPERTIES OF SINTERED TIN-TIB2 AND TI(CN)-TIB2 CERAMICS AT HIGH-TEMPERATURE
SHOBU, K
WATANABE, T
ENOMOTO, Y
UMEDA, K
TSUYA, Y
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1987, 70 (05) : C103 - C104
[2] Microstructure and Properties of In-situ Synthesized High TiB2 Content TiB2/SiC Composites
Ru Hongqiang
Zhang Xin
Zhang Heng
Zhang Cuiping
RARE METAL MATERIALS AND ENGINEERING, 2018, 47 : 319 - 322
[3] The comparison of densification mechanisms and microstructure evolution among TiB2 ceramics sintered under different levels of high pressure
Xu, Haiyue
Li, Yanjia
Yang, Jinhua
Yang, Rui
Liu, Hu
Liu, Wei
Sun, Jiajia
Jiao, Jian
MATERIALS TODAY COMMUNICATIONS, 2024, 38
[4] On the simulation of spark plasma sintered TiB2 ultra high temperature ceramics: A numerical approach
Fattahi, Mehdi
Ershadi, Meysam Najafi
Vajdi, Mohammad
Moghanlou, Farhad Sadegh
Namini, Abbas Sabahi
Asl, Mehdi Shahedi
CERAMICS INTERNATIONAL, 2020, 46 (10) : 14787 - 14795
[5] Effect of high-energy ball-milling and TiB2 content on microstructures and properties of Cu-TiB2 composites sintered by SPS
Kwon, Dae-Hwan
Nguyen, Thuy Dang
Choi, Pyuck-Pa
Kim, Ji-Soon
Kwon, Young-Soon
HEAT TREATMENT OF MATERIALS, 2006, 118 (661-665): : 661 - +
[6] INFLUENCE OF HIGH PRESSURE-HIGH TEMPERATURE METHOD ON THE SELECTED MECHANICAL PROPERTIES OF STEEL AISI 316L WITH 2% TiB2
Kurtyka, P.
Sulima, I
Hyjek, P.
Jaworska, L.
ARCHIVES OF METALLURGY AND MATERIALS, 2019, 64 (04) : 1585 - 1592
[7] Synthesis and mechanism of TiB2?TiN ceramic composites by high-pressure method
Liu, Ming Ming
Hu, Mei Hua
Wang, Yue Yue
Bi, Ning
Li, Shang Sheng
Li, Yong
CERAMICS INTERNATIONAL, 2021, 47 (10) : 14146 - 14150
[8] Micromechanical, high-temperature testing of steel-TiB2 composite sintered by high pressure-high temperature method
Sulima, Iwona
Boczkal, Grzegorz
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 644 : 76 - 78
[9] Effects of TiB2 content and alloy elements (Mg, Mo, V) on the compression properties of high-volume-fraction TiB2/Al composites
Zhang, Long-Jiang
Xuan, Qian-Qian
Wang, Jin-Guo
Qiu, Feng
Jiang, Qi-Chuan
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 607 : 28 - 32
[10] SPS PROCESSED TiB2 REINFORCED Y-α-SiAlON COMPOSITES: HIGH TEMPERATURE TRIBOMECHANICAL PROPERTIES
Himanshu
Sarkar, Soumya
Halder, Rupa
Biswas, Mita
Bandyopadhyay, Siddhartha
Wani, Md Farooq
COMPOSITES THEORY AND PRACTICE, 2019, 19 (03): : 95 - 99

← 1 2 3 →