Track Substructure Assessment using Non-Destructive Load Tests. A Portuguese Case Study.

被引:2
|
作者
De Chiara, F. [1 ]
Pereira, D. [2 ]
Fontul, S. [3 ]
Fortunato, E. [3 ]
机构
[1] Univ Rome, I-0018 Rome, Italy
[2] Univ Nova Lisboa, P-2829 516 Caparica, Portugal
[3] LNEC, Nat Lab Civil Engn, P-1700 066 Lisbon, Portugal
关键词
Track construction; FWD; back-calculation; sub-ballast; structural evaluation;
D O I
10.1016/j.sbspro.2012.09.962
中图分类号
U [交通运输];
学科分类号
08 ; 0823 ;
摘要
Nowadays, there is an increased interest in developing performance based specifications for quality control during the construction, that can provide more realistic information about the life cycle behaviour of the track. In this research, Falling Weight Deflectometer (FWD) tests were undertaken during the construction of a 29 km new railway line, at the top of the substructure and in different months. Based on FWD deflections, structural models of the track were established through back-calculation, and the variation of the moduli for different testing campaigns was evaluated. The main results obtained are presented and analysed in this paper. (C) 2012 The Authors. Published by Elsevier Ltd. Selection and/or peer-review under responsibility of SIIV2012 Scientific Committee
引用
收藏
页码:1130 / 1139
页数:10
相关论文
共 50 条
  • [41] Assessment of Modern Roadways Using Non-destructive Geophysical Surveying Techniques
    Christina Plati
    Andreas Loizos
    Konstantinos Gkyrtis
    Surveys in Geophysics, 2020, 41 : 395 - 430
  • [42] Assessment of Modern Roadways Using Non-destructive Geophysical Surveying Techniques
    Plati, Christina
    Loizos, Andreas
    Gkyrtis, Konstantinos
    SURVEYS IN GEOPHYSICS, 2020, 41 (03) : 395 - 430
  • [43] Investigative Assessment of Concrete Slab Using Non-Destructive Evaluation Techniques
    Li, Zhengqi
    Desai, Jigar
    STRUCTURES CONGRESS 2019: BUILDINGS AND NATURAL DISASTERS, 2019, : 162 - 170
  • [44] Non-Destructive Assessment of Mango Firmness and Ripeness Using a Robotic Gripper
    Blanes, C.
    Cortes, V.
    Ortiz, C.
    Mellado, M.
    Talens, P.
    FOOD AND BIOPROCESS TECHNOLOGY, 2015, 8 (09) : 1914 - 1924
  • [45] Quality of concrete condition assessment using several non-destructive techniques
    Breysse, Denys
    Sirieix, Colette
    Lataste, Jean-Francois
    STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2012, 8 (06) : 545 - 555
  • [46] Non-Destructive Assessment of Mango Firmness and Ripeness Using a Robotic Gripper
    C. Blanes
    V. Cortés
    C. Ortiz
    M. Mellado
    P. Talens
    Food and Bioprocess Technology, 2015, 8 : 1914 - 1924
  • [47] Non-destructive assessment of semiconductor carrier lifetime using photothermal radiometry
    Amirhaghi, S
    Kenyon, AJ
    Federighi, M
    Pitt, CW
    MATERIALS RELIABILITY IN MICROELECTRONICS VI, 1996, 428 : 455 - 460
  • [48] Assessment of seed quality using non-destructive measurement techniques: a review
    Rahman, Anisur
    Cho, Byoung-Kwan
    SEED SCIENCE RESEARCH, 2016, 26 (04) : 285 - 305
  • [49] Non-destructive quality assessment of hens' eggs using hyperspectral images
    Suktanarak, Sineenart
    Teerachaichayut, Sontisuk
    JOURNAL OF FOOD ENGINEERING, 2017, 215 : 97 - 103
  • [50] Characterization of historical lime plasters by combined non-destructive and destructive tests: The case of the sgraffito in Boznow (SW Poland)
    Bartz, Wojciech
    Rogoz, Jaroslaw
    Rogal, Robert
    Cupa, Adam
    Szroeder, Pawel
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 30 : 439 - 446