Evaluation of discharge voltage in AC-PDP manufactured under the vacuum condition after MgO deposition

被引：0

作者：

Uchida, K. ^{[1
]}

Uchida, G. ^{[3
]}

Kurauchi, T. ^{[1
]}

Terasawa, T. ^{[2
]}

Kajiyama, H. ^{[3
]}

Shinoda, T. ^{[3
]}

机构：

[1] ULVAC Inc, Tsukuba Inst Super Mat, Ibaraki, Japan

[2] ULVAC Inc, Stand R&D Dept, Flat Display Equipment Devis 2, Kanagawa, Japan

[3] Univ Tokyo, Inst Ind Sci, Tokyo, Japan

来源：

IDW '06: PROCEEDINGS OF THE 13TH INTERNATIONAL DISPLAY WORKSHOPS, VOLS 1-3 | 2006年

关键词：

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A new PDP manufacturing method in which processes, such as deposition of MgO, and sealing of front and rear plate, are carried out in succession under the vacuum condition is proposed During the process, MgO surface is expected to be kept clean. We have evaluated the firing voltage by using a 4-inch PDP test panel. The measured result shows that the firing voltage is stabilized in a brief time from the beginning of the measurement. The developed method is considerably effective for decreasing the aging process time.

引用

页码：347 / +

页数：2

共 23 条

[21] Partial Discharge Characteristics and Mechanisms in Consideration of Charge Behavior on Alumina Dielectrics under AC Voltage in Vacuum
Kojima, H.
Ishida, M.
Hayakawa, N.
Hanai, M.
Ikeda, J.
Shioiri, T.
Okubo, H.
2013 2ND INTERNATIONAL CONFERENCE ON ELECTRIC POWER EQUIPMENT - SWITCHING TECHNOLOGY (ICEPE-ST), 2013,
[22] Evaluation of Partial Discharge Characteristics in Inclined Plane Tracking and Erosion Tests on Silicone Rubber under AC Voltage
Pevtsov, Valeria
Jacob, Nathan
Kordi, Behzad
2020 IEEE ELECTRICAL INSULATION CONFERENCE (EIC), 2020, : 175 - 178
[23] Investigation of metal evaporation and film deposition with a high-voltage glow-discharge electron gun under middle vacuum
Melnyk, IV
Melnyk, VI
Porytskyy, PV
ISDEIV: XXITH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM, VOLS 1 AND 2, PROCEEDINGS, 2004, 21 : 575 - 578

← 1 2 3 →