Monitoring tool wear by visual pattern recognition

被引:0
|
作者
Wood, CH [1 ]
Sihra, TS [1 ]
Harrison, DK [1 ]
机构
[1] Glasgow Caledonian Univ, Dept Engn Sci & Design, Glasgow G4 0BA, Lanark, Scotland
来源
QRM 2002: PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON QUALITY, RELIABILITY, AND MAINTENANCE | 2002年
关键词
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper reports the results of acquiring vibration readings during the cutting operation of a centre lathe and analysing the data off-line with a view to determining the state of the tool tip during the cutting procedure. The process of using visual pattern recognition to measure the signature analysis of the data and to distinguish differing classes of tool wear will be discussed. The viability of such a system on the shop floor and the potential future applicability will be illustrated. The results show that the system is capable of classifying variant degrees of tool tip flank wear from the vibration readings, however, the process is too unwieldy and requires too much acumen for it to be transferred easily to the shop floor.
引用
收藏
页码:129 / 132
页数:4
相关论文
共 50 条
  • [31] Compression for visual pattern recognition
    Heidemann, Gunther
    Ritter, Helge
    2008 3RD INTERNATIONAL SYMPOSIUM ON COMMUNICATIONS, CONTROL AND SIGNAL PROCESSING, VOLS 1-3, 2008, : 1520 - +
  • [33] Pattern Recognition of Tool Wear in High-speed Milling Based upon Nonlinear Analysis
    Li, Qing
    Ji, Xia
    Liang, Steven Y.
    PROCEEDINGS OF 2017 IEEE 7TH INTERNATIONAL CONFERENCE ON ELECTRONICS INFORMATION AND EMERGENCY COMMUNICATION (ICEIEC), 2017, : 511 - 515
  • [34] Tool wear monitoring by optical techniques
    Barton, J
    Reuben, B
    MATERIALS WORLD, 1996, 4 (03) : 131 - 132
  • [35] Hybrid Learning for Tool Wear Monitoring
    X. Li
    S. Dong
    P.K. Venuvinod
    The International Journal of Advanced Manufacturing Technology, 2000, 16 : 303 - 307
  • [36] Tool wear monitoring - an intelligent approach
    Rao, CS
    Srikant, RR
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2004, 218 (08) : 905 - 912
  • [37] Tool-wear monitoring and control
    Srinivas, J.
    Dukkipati, Rao V.
    Sreebalaji, V.
    Ramakotaih, K.
    MANUFACTURING ENGINEERING AND MATERIALS HANDLING, 2005 PTS A AND B, 2005, 16 : 901 - 904
  • [38] Hybrid learning for tool wear monitoring
    Li, X
    Dong, S
    Venuvinod, PK
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2000, 16 (05): : 303 - 307
  • [39] A novel method on tool wear monitoring
    Wang, SL
    Yang, D
    Chen, W
    PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1 AND 2: MODERN INDUSTRIAL ENGINEERING AND INNOVATION IN ENTERPRISE MANAGEMENT, 2005, : 1212 - 1215
  • [40] Vibrodiagnostics as the tool of a tap wear monitoring
    Monka, Peter
    Monkova, Katarina
    Uban, Marek
    Hruzik, Lumir
    Vasina, Martin
    ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 : 959 - 964