Characteristics of porous BaTiO3-based PTC thermistors fabricated by adding graphite powders

被引：19
|
作者：
Park, K [1 ]
机构：
[1] Sejong Univ, Ctr Adv Mat, Dept Adv Mat Engn, Seoul 143747, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY | 2004年 / 107卷 / 01期
关键词：
thermistors; electrical properties; BaTiO3; graphite;
D O I：
10.1016/j.mseb.2003.10.003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The crystalline structure, microstructure, and electrical properties of porous graphite-containing BaTiO3-based PTC thermistors were studied. The sintered ceramics showed a tetragonal perovskite structure, irrespective of the added graphite content. The added graphite formed the interstitial solid solutions with Ba0.999Sb0.001TiO3 and was distributed homogeneously in the sintered ceramics. The grain size of the as-sintered graphite-containing BaTiO3-based ceramics was much larger than that of the as-sintered graphite-free ones. This is mainly due to the exothermic reactions of the graphites and oxygen molecules in the ceramics. The porosity of the as-sintered ceramics increased with increasing graphite content due to an enhanced evolution of CO and CO2 gases associated with the exothermic reactions. It was found that the newly prepared porous graphite-containing BaTiO3-based PTC thermistors showed a large PTCR effect. (C) 2003 Ellsevier B.V. All rights reserved.
引用
收藏
页码：19 / 26
页数：8
相关论文
共 50 条
  • [31] Preparation and electric properties of BaTiO3-based PTC ceramics doped by gaseous rare earth
    Dept. of Applied Chemistry, Harbin Institute of Technology, Harbin 150001, China
    Cailiao Kexue yu Gongyi, 2007, 1 (91-94):
  • [32] Electrical properties of Y- and Mn-doped BaTiO3-based PTC ceramics
    Ding, S. W.
    Jia, G.
    Wang, J.
    He, Z. Y.
    CERAMICS INTERNATIONAL, 2008, 34 (08) : 2007 - 2010
  • [33] Catalytic Combustion-Type Hydrogen Sensor Using BaTiO3-based PTC Thermistor
    Yuasa, Masayoshi
    Nagano, Takahito
    Tachibana, Naoki
    Kida, Tetsuya
    Shimanoe, Kengo
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2013, 96 (06) : 1789 - 1794
  • [34] Mechanical stability of BaTiO3-based PTC thermistor components:: experimental investigation and theoretical modelling
    Supancic, P
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (12) : 2009 - 2024
  • [35] Electrode influence on transient thermal gradients in BaTiO3 PTC thermistors
    Smith, D.S.
    Ghayoub, N.
    Sceal, E.
    Smith, A.
    Edwards, A.
    Key Engineering Materials, 1997, 132-136 (Pt 2) : 1317 - 1320
  • [36] Graphite/Ni/BaTiO3 PTC composites
    Qu, YF
    Du, J
    Ma, WB
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 : 552 - 555
  • [37] Study on graphite/metal Cr/BaTiO3 based PTC composite
    Qu, YF
    Lu, JB
    Ma, WB
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 : 465 - 468
  • [38] Study on graphite/metal Cr/BaTiO3 based PTC composite
    Qu, Yuanfang
    Lu, Junbiao
    Ma, Weibing
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2002, 31 (SUPPL. 1): : 467 - 468
  • [39] Low temperature sintering behavior of B2O3 vapor in BaTiO3-based PTCR thermistors
    Qi, JQ
    Chen, WP
    Wang, HY
    Wang, Y
    Li, LT
    Chan, HLW
    SENSORS AND ACTUATORS A-PHYSICAL, 2004, 116 (02) : 215 - 218
  • [40] Formation and performance of ohmic contact electrodes on BaTiO3-based thermistors by localized electroless Cu-plating
    Liu, B. S.
    Zhang, F. M.
    Yang, X. Y.
    THIN SOLID FILMS, 2010, 519 (01) : 373 - 377
12345