Study on the convective heat transfer and pressure drop in the micro-channel heat sink

被引:63
|
作者
Naphon, Paisarn [1 ]
Khonseur, Osod [1 ]
机构
[1] Srinakharinwirot Univ, Fac Engn, Dept Mech Engn, Thermo Fluid & Heat Transfer Enhancement Lab TFHT, Ongkharak 26120, Nakhorn Nayok, Thailand
关键词
Convective heat transfer; Micro-channel; Heat sink; FLUX BOUNDARY-CONDITION; DIATOMIC GAS-FLOW; NUMERICAL-ANALYSIS; PLATE FIN; IN-LINE; PERFORMANCE; OPTIMIZATION; DSMC; RESISTANCE; MODEL;
D O I
10.1016/j.icheatmasstransfer.2008.09.001
中图分类号
O414.1 [热力学];
学科分类号
摘要
Experiments have been performed to investigate the heat transfer characteristics and pressure drop in the micro-channel heat sinks under constant heat flux conditions. The experiments are performed for the Reynolds number and heat flux in the ranges of 200-1000 and 1.80-5.40 kW/m(2), respectively. The micro-channel heat sink with two different channel heights and two different channel widths are accomplished by wire electrical discharge machine. Effects of different geometrical configurations parameters of the micro-channel and heat flux on the heat transfer characteristics and pressure drop are considered. The micro-channel geometry configuration has significant effect on the enhancement heat transfer and pressure drop. The results of this study are expected to lead to guidelines that will allow the design of the micro-channel heat exchangers with improved heat transfer performance of the electronic devices. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:39 / 44
页数:6
相关论文
共 50 条
  • [41] Combined micro-channel heat sink optimization for cooled electronics
    Bello-Ochende, Tunde
    Meyer, Josua P.
    [J]. PROCEEDINGS OF THE ASME/JSME THERMAL ENGINEERING SUMMER HEAT TRANSFER CONFERENCE 2007, VOL 2, 2007, : 661 - 669
  • [42] EXPERIMENTAL AND NUMERICAL STUDY OF METHANOL-WATER MIXTURE SINGLE-PHASE HEAT TRANSFER IN A MICRO-CHANNEL HEAT SINK
    Kwok, Chun K.
    Asada, Matthew M.
    Mita, Jonathan R.
    Qu, Weilin
    [J]. PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE, 2012, VOL 2, 2012, : 523 - 529
  • [43] Heat transfer performance of T-Y type micro-channel heat sink with liquid GaInSn coolant
    Liu, Huan-Ling
    An, Xiao-Kang
    Wang, Cong-Si
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2017, 120 : 203 - 219
  • [44] A micro-channel heat sink with integrated temperature sensors for phase transition study
    Jiang, LN
    Wong, M
    Zohar, Y
    [J]. MEMS '99: TWELFTH IEEE INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS, TECHNICAL DIGEST, 1999, : 159 - 164
  • [45] A novel transient thermohydraulic model of micro-channel heat sink
    Jung, Eui Guk
    Boo, Joon Hong
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 145
  • [46] Topology Optimization Design of Micro-Channel Heat Sink by Considering the Coupling of Fluid-Solid and Heat Transfer
    Wang, Yue
    Wang, Jiahao
    Liu, Xiaomin
    [J]. ENERGIES, 2022, 15 (23)
  • [47] Subcooled flow boiling in multiple parallel rectangular micro-channel heat sink: Development of heat transfer correlation
    Rohini, Ajith Krishnan
    Choi, Won -Woo
    Kim, Sung -Min
    [J]. APPLIED THERMAL ENGINEERING, 2024, 250
  • [48] Consolidated method to predicting pressure drop and heat transfer coefficient for both subcooled and saturated flow boiling in micro-channel heat sinks
    Kim, Sung-Min
    Mudawar, Issam
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (13-14) : 3720 - 3731
  • [49] Analytical and experimental determination of slug flow parameters, pressure drop and heat transfer coefficient in micro-channel condensation
    Liang, Gangtao
    Mascarenhas, Nikhin
    Mudawar, Issam
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 111 : 1218 - 1233
  • [50] Modeling of pressure drop and heat transfer for flow boiling in a mini/micro-channel of rectangular cross-section
    Jain, Shashwat
    Jayaramu, Prasanna
    Gedupudi, Sateesh
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 140 : 1029 - 1054