Research on Moulding Process and Dielectric Property of Polyimide Foam

被引：3

作者：

Qi, Kailiang ^{[1
]}

Zhang, Guangcheng ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Sch Nat & Appl Sci, Dept Appl Chem, Xian 710129, Peoples R China

来源：

PROGRESS IN POLYMER PROCESSING | 2012年 / 501卷

关键词：

polyimide; moulding process; cellular structure; dielectric property; MICROSCALE; DRAINAGE;

D O I：

10.4028/www.scientific.net/KEM.501.215

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Foaming moulding process, cellular structure and dielectric property of polyimide (PI) foam which has been prepared by esterification method were discussed. Research results showed that the cell of prepared PI foam was well-distributed and its pore volume and porosity were bigger by microwave heating when methanol was used as the foaming agent and its content in the polyester ammonium salt (PEAS) precursor powder was 13-15%; meanwhile, the dielectric constant and loss factor of PI foam were lower.

引用

页码：215 / 219

页数：5

共 50 条

[1] Synthesis and Dielectric Property of Polyimide/MWNTs Nanocomposite Films
Tian, Feng
Zhang, Mingyan
Wu, Zijian
Zhu, Xiaoying
Diao, Penghe
Wang, Jihua
ICPADM 2009: PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON PROPERTIES AND APPLICATIONS OF DIELECTRIC MATERIALS, VOLS 1-3, 2009, : 829 - 832
[2] Process analysis of foam injection moulding with physical blowing agents
Michaeli, W
Cramer, A
JOURNAL OF POLYMER ENGINEERING, 2006, 26 (2-4) : 227 - 243
[3] High pressure integral foam moulding of aluminium - Process technology
Wiehler, Harald
Koerner, Carolin
Singer, Robert F.
ADVANCED ENGINEERING MATERIALS, 2008, 10 (03) : 171 - 178
[4] Research of Compression and Energy Absorption Characteristics of Polyimide Foam
Li, Mengqian
Ma, Gang
Xiao, Jijun
ENGINEERING AND MANUFACTURING TECHNOLOGIES, 2014, 541-542 : 30 - 34
[5] Structure-property relationships of nano-foam polyimide films with low dielectric constant and high thermal stability.
Cha, HJ
Hedrick, J
DiPietro, RA
Blume, T
Beyers, R
Yoon, DY
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1996, 211 : 310 - POLY
[6] Injection moulding of structural foam
Kunsts Plast Eur, 9 (15-17):
[7] Injection moulding of structural foam
Steinbichler, G
Kragl, J
Pierick, D
Jacobsen, K
KUNSTSTOFFE-PLAST EUROPE, 1999, 89 (09): : 50 - +
[8] Structures and dielectric properties of thin polyimide films with nano-foam morphology
Cha, HJ
Hedrick, J
DiPietro, RA
Blume, T
Beyers, R
Yoon, DY
APPLIED PHYSICS LETTERS, 1996, 68 (14) : 1930 - 1932
[9] Research on electromagnetic shielding property of aluminum foam
Yu, Haijun
Yao, Guangchun
Liu, Yihan
Yang, Guangiun
ALUMINUM ALLOYS FOR TRANSPORTATION, PACKAGING, AEROSPACE AND OTHER APPLICATIONS, 2007, : 213 - +
[10] Modeling of Flexible Polyurethane Foam Shrinkage for Bra Cup Moulding Process Control
Wu, Long
Yick, Kit-Lun
Ng, Sunpui
Sun, Yue
POLYMERS, 2018, 10 (05):

← 1 2 3 4 5 →