Magnetizing Inductance Determination in a Six-Phase Induction Machine

被引：2

作者：

Brkovic, Bogdan Mihailo ^{[1
]}

Ristic, Leposava Bratimir ^{[1
]}

Terzic, Mladen Vlajko ^{[1
]}

Stankovic, Ana Vladan ^{[2
]}

Lazarevic, Zoran Mileta ^{[1
]}

机构：

[1] Univ Belgrade, Sch Elect Engn, Belgrade 11000, Serbia

[2] Cleveland State Univ, Dept Elect Engn & Comp Sci, Cleveland, OH 44115 USA

来源：

IEEE TRANSACTIONS ON ENERGY CONVERSION | 2019年 / 34卷 / 02期

关键词：

Dcexcitation; finite element analysis; magnetizing inductance; no-load test; six-phase induction machine; PARAMETER-IDENTIFICATION; SYNCHRONOUS MACHINE; GENERATOR; MOTOR; WINDINGS; DESIGN;

D O I：

10.1109/TEC.2018.2881763

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

A simple offline method for measuring the magnetizing inductance of an asymmetrical six-phase induction machine is presented in this paper. The measurement procedure is based on dc excitation and it is performed at standstill. As opposed to the standard no load test, the magnetizing inductance is measured solely with the stator leakage influence significantly diminished. Additionally, the iron losses in the machine and their influence on the measurement are reduced considerably. The proposed method is applicable regardless ofwhether the neutral point of the machine is accessible or not. The method is verified through finite element analysis and experimentally. The obtained test results confirm the accuracy of the proposed approach.

引用

页码：812 / 823

页数：12

共 50 条

[31] A Three-Phase Inverter Based Overmodulation Strategy of Asymmetrical Six-Phase Induction Machine
Paul, Sayan
Basu, Kaushik
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2021, 36 (05) : 5802 - 5817
[32] Experimental Magnetizing Inductance Identification in Five-Phase Induction Machines
Che, H. S.
Jones, M.
Levi, E.
Riveros, J. A.
Bogado, B.
Barrero, F.
39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 5179 - 5184
[33] A new circuit-oriented model for the analysis of six-phase induction machine performances
Aroquiadassou, Gerard
Cavagnino, Andrea
Henao, Humberto
Boglietti, Aldo
Capolino, Gerard-Andre
ELECTRIC POWER SYSTEMS RESEARCH, 2008, 78 (10) : 1798 - 1805
[34] Modeling of Six-Phase Double Fed Induction Machine for Autonomous DC Voltage Generation
Maciejewski, Pawel
Iwanski, Grzegorz
2015 TENTH INTERNATIONAL CONFERENCE ON ECOLOGICAL VEHICLES AND RENEWABLE ENERGIES (EVER), 2015,
[35] Simple circuit-oriented model for predicting six-phase induction machine performances
Aroquiadassou, G.
Henao, H.
Capolino, G. A.
Boglietti, A.
Cavagnino, A.
IECON 2006 - 32ND ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS, VOLS 1-11, 2006, : 822 - +
[36] Efficiency Improvement in DTC of Six-Phase Induction Machine by Adaptive Gradient Descent of Flux
Taheri, Asghar
Rahmati, Abdolreza
Kaboli, Shahriyar
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2012, 27 (03) : 1552 - 1562
[37] Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters
Che, Hang Seng
Levi, Emil
Jones, Martin
Duran, Mario J.
Hew, Wooi-Ping
Abd Rahim, Nasrudin
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (01) : 164 - 176
[38] Direct torque control technology of a six-phase induction machine based on predictive control
Li, S
Xiao, HH
Chen, HY
Cui, SH
ICMIT 2005: CONTROL SYSTEMS AND ROBOTICS, PTS 1 AND 2, 2005, 6042
[39] Modelling Approaches for an Asymmetrical Six-Phase Machine
Zabaleta, M.
Levi, E.
Jones, M.
PROCEEDINGS 2016 IEEE 25TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE), 2016, : 173 - 178
[40] Direct Torque Control based on Virtual Voltage Vector for a Six-phase Induction Machine
Garcia Entrambasaguas, P.
Gonzalez-Prieto, I
Duran, M. J.
Bermudez, M.
Barrero, F.
REVISTA IBEROAMERICANA DE AUTOMATICA E INFORMATICA INDUSTRIAL, 2018, 15 (03): : 277 - 285

← 1 2 3 4 5 →